công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TP11368 bảng dữ liệu(PDF) 2 Page - National Semiconductor (TI) |
|
|
TP11368 bảng dữ liệu(HTML) 2 Page - National Semiconductor (TI) |
2 / 18 page Connection Diagrams Pin Descriptions TSI Transmit PCM serial data input. TSI is an 8-bit PCM data stream and is shifted into an 8-bit serial-to-parallel register on the falling edges of PSCK while CE and TRB are high. The last 8 bits of TSI are latched and transferred to the core for processing at the falling edge of CE. TSO Transmit ADPCM TRI-STATE® serial data output. TSO is a data bit stream of 4- to 5-bit length, and is shifted out with the rising edge of ASCK when CE is high following the process- ing of a transmit channel. TSO is in TRI-STATE mode while CE is low or while RSO output is active. RSI Receive ADPCM serial data input. RSI is a data bit stream of 4- to 5-bit length, and is shifted in with the falling edges of ASCK while CE is high and TRB is low. The last 4 or 5 bits of RSI are latched and transferred to the core for processing at the falling edge of CE. RSO Receive PCM TRI-STATE serial data output. RSO is an 8-bit PCM data stream and is shifted out with the rising edges of PSCK when CE is high following the processing of a receive channel. RSO is in TRI-STATE mode while CE is low or while TSO output is active. PSCK PCM serial clock input. PSCK is used to shift PCM data into TSI or out of RSO while CE is active (high). The transfer de- pends on the logic state of TRB. ASCK ADPCM serial clock input. ASCK is used to shift ADPCM data into RSI or out of TSO while CE is active (high). The transfer depends on the logic state of TRB. CLK Master clock input. CLK may be asynchronous to PSCK or ASCK. CE Chip enable input. When CE is high, it enables data transfer. The falling edge of CE latches and transfers the serial data TSI or RSI to the core for processing and strobes the control signals QSEL0, QSEL1, PCM1, EN and INIT. CE should change state only when PSCK and ASCK are high. CE, when low, sets the TSO and RSO outputs into TRI-STATE mode. TRB Transmitter or receiver select. A logic low at TRB selects the receiver of the channel processed. A logic high enables the transmitter of the channel processed. TRB determines which input register is enabled and which output register and out- put is enabled. TRB should be stable while CE is high. EN Channel enable input. EN is strobed in with the falling edge of CE. A logic high at the falling edge of CE indicates that the channel is active, and the ADPCM will process the data just clocked in. INIT Channel initialization input. INIT is read at the falling edge of CE. A logic high at the falling edge of CE causes the ADPCM processor to initialize the channel currently processing. PCM1 PCM coding law select. A logic low at PCM1 selects 8-bit µ-law, while a logic high selects 8-bit A-law with even bit in- version. Plastic Chip Carrier DS012902-2 Top View Order Number TP11368V See NS Package Number V28A Plastic Dual-In-Line DS012902-3 Top View Order Number TP11368N See NS Package Number N24A www.national.com 2 |
Số phần tương tự - TP11368 |
|
Mô tả tương tự - TP11368 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |