 |
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
|
công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TS68EN360VR33L bảng dữ liệu(PDF) 11 Page - ATMEL Corporation |
|
||||||||||||||||||||||||||||||
TS68EN360VR33L bảng dữ liệu(HTML) 11 Page - ATMEL Corporation |
|
|
11 / 82 page  11 TS68EN360 2113A–HIREL–03/02 Requirements General This microcircuits are in accordance with the applicable document and as specified herein. Design and Construction Terminal Connections Depending on the package, the terminal connections shall be as shown in Figure 2 and Figure 3. Lead Material and Finish Lead material and finish shall be as specified in MIL-STD-883 (see enclosed “Ordering Information” on page 79). Package The macrocircuits are packaged in hermetically sealed ceramic packages which are conform to case outlines of MIL-STD-1835 or as follow: • PGA but see “241-pin – PGA” on page 77 •CERQUAD The precise case outlines are described at the end of the specification (“Package Mechanical Data” on page 77) and into MIL-STD-1835. Electrical Characteristics Note: This device contains protective circuitry against damage due to high static voltages or electrical fields; however, it is advised that normal precautions be taken to avoid application of any voltages higher than maximum-rated voltages to this high-imped- ance circuit. Reliability of operation is enhanced if unused inputs are tied to an appropriate logic voltage level (e.g., either GND or V DD). Notes: 1. Permanent damage can occur if maximum ratings are exceeded. Exposure to voltages or currents in excess of recom- mended values affects device reliability. Device modules may not operate normally while being exposed to electrical extremes. 2. Although sections of the device contain circuitry to protect against damage from high static voltages or electrical fields, take normal precautions to avoid exposure to voltages higher than maximum-rated voltages. 3. The supply voltage V CC must start and restart from 0.0V; otherwise, the 360 will not come out of reset properly.Unless other- wise stated, all voltages are referenced to the reference terminal. Table 3. Absolute Maximum Ratings Rating Symbol Value Unit Supply Voltage (1)(2) V CC -0.3 to +6.5 V Input Voltage (1)(2) VIN -0.3 to +6.5 V Storage Temperature Range T STG -55 to +150 °C |
Số phần tương tự - TS68EN360VR33L |
|
|
Link URL |
| Chính sách bảo mật |
| ALLDATASHEET.VN |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Vietnamese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
