công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STCF04 bảng dữ liệu(PDF) 1 Page - STMicroelectronics |
|
STCF04 bảng dữ liệu(HTML) 1 Page - STMicroelectronics |
1 / 43 page This is information on a product in full production. September 2012 Doc ID 022927 Rev 3 1/43 43 STCF04 High power white LED SuperCap™ driver with I²C interface Datasheet − production data Features ■ Buck-boost converter with 1.5 A peak current limiting and synchronous rectification ■ Burst mode operation when output is charged ■ Input voltage range 2.5 V to 5.5 V ■ Programmable output charging voltage up to 5.5 V ■ Full I²C control ■ Operation modes: – Shutdown mode – Monitoring mode with NTC and SuperCap monitoring – Idle mode –Flash mode – Torch mode: up to 320 mA ■ Controlled LED current in all modes ■ Soft and hard triggering of Flash, Torch and Picture light modes ■ Torch dimming in 12 exponential steps ■ Flash dimming in 8 steps ■ Active balancing of SuperCap voltage ■ SuperCap status flag ■ Internally or externally timed flash operation ■ Digitally programmable safety timeout in Flash mode ■ Torch mode safety timeout ■ LED overtemperature detection and protection with external NTC resistor ■ Shorted LED failure detection and protection ■ Chip overtemperature detection and protection Applications ■ Cell phones and smartphones ■ Camera flashes/strobe ■ PDAs and digital still cameras Description The STCF04 is a dedicated and space optimized high efficiency solution for driving a flash LED module in cameras, phones, PDAs and other handheld devices using the SuperCap technology. It is based on a DC-DC buck-boost converter, which ensures a proper and efficient charging control and monitoring of the SuperCap in the whole battery voltage range. The output current control ensures a good current regulation over the forward voltage spread characteristics of the flash LEDs in Torch and Flash mode operation. The SuperCap charging current is limited to a defined value which avoids overload of the battery. The SuperCap discharge current flows through the LEDs and the external MOSFET which must be chosen according to the desired flash current. TFBGA25 (3 x 3 mm) Table 1. Device summary Order code Package Packaging STCF04TBR TFBGA25 (3 x 3 mm) 3000 parts per reel www.st.com |
Số phần tương tự - STCF04 |
|
Mô tả tương tự - STCF04 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |