Socket base

Socket base orientation mark

Compression Plate

compression plate

orientation mark

Device

device pin A1 orientation mark

When placing BGA device inside the socket, note

orientation of the socket base, compression plate

and device. Pin A1 orientation mark on the device

is in the upper left corner if looking from the top.

Orientation mark on the socket base is in the

upper left corner if looking from the top.

Orientation mark on the compression plate is on

the upper left corner if looking from the top.

Ironwood Electronics, Inc.

Tele: (800) 404-0204

www.ironwoodelectronics.com

Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all

other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.

Description: User instructions

Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.

STATUS: Released

REV. A

DATE: 09/16/2014

Material: N/A

Finish: N/A

Weight: 5.21

SM-BGA-9050 Drawing

SCALE: 4:1

SHEET: 5 OF 5

ENG: E. Smolentseva

FILE: SM-BGA-9050 Dwg

DRAWN BY: M. Raske