công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TS4100 bảng dữ liệu(PDF) 8 Page - Silicon Laboratories |
|
TS4100 bảng dữ liệu(HTML) 8 Page - Silicon Laboratories |
8 / 24 page 2.1.8 Power-Up Sequence To prevent permanent damage to the ADDA, ADDB, ADDC, and INH pin, the power supply voltage should be applied to the device first followed by the voltage to ADDA, ADDB, ADDC, and/or INH. If it is not possible to follow this power-supply sequence, a 500kΩ resistor can be placed in series with the digital I/O pins for protection as shown in the figure below. However, if an input voltage is applied be- fore applying power to the switch/multiplexer, the device will not be damaged as the inputs are independent of the supply voltage. Figure 2.5. Digital I/O Overvoltage Protection Figure 2.6. TS4100-TS4102 Address/Enable Turn-On/Off Time Test Setup TS4100/01/02 Data Sheet System Overview silabs.com | Smart. Connected. Energy-friendly. Rev. 1.0 | 7 |
Số phần tương tự - TS4100 |
|
Mô tả tương tự - TS4100 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |