AD4000BRMZ datasheet(10/33 Pages) AD

tên linh kiện	AD4000BRMZ

Giải thích chi tiết về linh kiện	16-Bit, 2 MSPS Precision Pseudo Differential ADC

Download	33 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

10 / 33 page

Data Sheet

AD4000

Rev. 0 | Page 9 of 32

TERMINOLOGY

Integral Nonlinearity Error (INL)

INL refers to the deviation of each individual code from a line

drawn from negative full scale through positive full scale. The

point used as negative full scale occurs ½ LSB before the first

code transition. Positive full scale is defined as a level 1½ LSB

beyond the last code transition. The deviation is measured from

the middle of each code to the true straight line (see Figure 30).

Differential Nonlinearity Error (DNL)

In an ideal ADC, code transitions are 1 LSB apart. DNL is the

maximum deviation from this ideal value. It is often specified in

terms of resolution for which no missing codes are guaranteed.

Zero Error

Zero error is the difference between the ideal midscale voltage,

that is, 0 V, from the actual voltage producing the midscale

output code, that is, 0 LSB.

Gain Error

The first transition (from 100 ... 00 to 100 ... 01) occurs at a level

½ LSB above nominal negative full scale (−4.999981 V for the

±5 V range). The last transition (from 011 … 10 to 011 … 11)

occurs for an analog voltage 1½ LSB below the nominal full

scale (+4.999943 V for the ±5 V range). The gain error is the

deviation of the difference between the actual level of the last

transition and the actual level of the first transition from the

difference between the ideal levels.

Spurious-Free Dynamic Range (SFDR)

SFDR is the difference, in decibels (dB), between the rms

amplitude of the input signal and the peak spurious signal.

Effective Number of Bits (ENOB)

ENOB is a measurement of the resolution with a sine wave

input. It is related to SINAD as follows:

ENOB = (SINADdB − 1.76)/6.02

ENOB is expressed in bits.

Noise Free Code Resolution

Noise free code resolution is the number of bits beyond which it is

impossible to distinctly resolve individual codes. It is calculated as

Noise Free Code Resolution = log2(2N/Peak-to-Peak Noise)

Noise free code resolution is expressed in bits.

Effective Resolution

Effective resolution is calculated as

Effective Resolution = log2(2N/RMS Input Noise)

Effective resolution is expressed in bits.

Total Harmonic Distortion (THD)

THD is the ratio of the rms sum of the first five harmonic

components to the rms value of a full-scale input signal and is

expressed in decibels.

Dynamic Range

Dynamic range is the ratio of the rms value of the full scale to

the total rms noise measured. The value for dynamic range is

expressed in decibels. It is measured with a signal at −60 dBFS

so that it includes all noise sources and DNL artifacts.

Signal-to-Noise Ratio (SNR)

SNR is the ratio of the rms value of the actual input signal to the

rms sum of all other spectral components below the Nyquist

frequency, excluding harmonics and dc. The value for SNR is

expressed in decibels.

Signal-to-Noise-and-Distortion Ratio (SINAD)

SINAD is the ratio of the rms value of the actual input signal to

the rms sum of all other spectral components that are less than

the Nyquist frequency, including harmonics but excluding dc.

The value of SINAD is expressed in decibels.

Aperture Delay

Aperture delay is the measure of the acquisition performance

and is the time between the rising edge of the CNV input and

when the input signal is held for a conversion.

Transient Response

Transient response is the time required for the ADC to to acquire a

full-scale input step to ±0.5 LSB accuracy.

Power Supply Rejection Ratio (PSRR)

PSRR is the ratio of the power in the ADC output at the

frequency, f, to the power of a 200 mV p-p sine wave applied to

the ADC VDD supply of frequency, f.

PSRR (dB) = 10 log(PVDD_IN/PADC_OUT)

where:

PVDD_IN is the power at the frequency, f, at the VDD pin.

PADC_OUT is the power at the frequency, f, in the ADC output.

Số phần tương tự - AD4000BRMZ

nhà sản xuất	tên linh kiện	bảng dữ liệu	Giải thích chi tiết về linh kiện
Analog Devices	AD4000BRMZ	1Mb / 36P	Precision, Pseudo Differential, SAR ADCs
Analog Devices	AD4000BRMZ-RL7	1Mb / 36P	Precision, Pseudo Differential, SAR ADCs

More results

Mô tả tương tự - AD4000BRMZ

nhà sản xuất	tên linh kiện	bảng dữ liệu	Giải thích chi tiết về linh kiện
Analog Devices	AD4001	926Kb / 34P	16-Bit, 2 MSPS, Precision SAR, Differential ADC
	AD4003	1Mb / 34P	18-Bit, 2 MSPS Precision SAR Differential ADC
	AD7383-4	1Mb / 33P	Pseudo Differential Input, Quad, 4 MSPS Simultaneous Sampling, 16-Bit/14-Bit, SAR ADC Rev. 0
List of Unclassifed Man...	AD7902BRQZ	1Mb / 29P	Dual Pseudo Differential 16-Bit, 1 MSPS PulSAR ADC 12.0 mW in QSOP
Analog Devices	AD7902	681Kb / 29P	Dual Pseudo Differential 16-Bit, 1 MSPS PulSAR ADC 12.0 mW in QSOP
	AD7626	1Mb / 30P	16-Bit, 10 MSPS, PulSAR Differential ADC
	AD7626	1Mb / 28P	16-Bit, 10 MSPS, PulSAR Differential ADC REV. A
	AD7625	1,008Kb / 25P	16-Bit, 6 MSPS, PulSAR Differential ADC
	AD7626	1Mb / 28P	16-Bit, 10 MSPS, PulSAR Differential ADC REV. 0
	AD7625BCPZ	673Kb / 24P	16-Bit, 6 MSPS, PulSAR Differential ADC REV. A

More results

AD4000BRMZ bảng dữ liệu(PDF) 10 Page - Analog Devices

AD4000BRMZ bảng dữ liệu(HTML) 10 Page - Analog Devices

Số phần tương tự - AD4000BRMZ

Mô tả tương tự - AD4000BRMZ

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

bảng dữ liệu tải về

Link URL