công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
2-1102770-5 bảng dữ liệu(PDF) 7 Page - Tyco Electronics |
|
2-1102770-5 bảng dữ liệu(HTML) 7 Page - Tyco Electronics |
7 / 43 page 84 Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 D-5200 Series (Continued) AMP Dynamic Series Connectors Insert Extraction Tool in the direction as shown, insert into the narrow lower section of Housing’s reverse convex hole. (make sure that you are holding tool in proper position, top and bottom.) * Take care not to insert tool into contact section. If you’ve inserted by error, replace the contact with a new one before proceeding. D-5 Contacts Application Tooling Crimp Type Contacts Extraction Tool Part Number: 409158-1 Instruction Sheet 411-5774 • How to Use Extraction Tool Receptacle Contact (Used in Receptacle Housing) Tab Contact (Used in Tab Housing) Wire Range AWG mm2 Ins. Dia. Range mm Wire Range Mark Contact Part Numbers* Sequential Tab Receptacle Tab 16 14 12 10 1.25 2.20 3.50 5.50 3~3.8 4~5.2 S M ST. LP. ST. LP. 179955-J 316040-J 179956-J 316041-J 917802-J 917804-J 917803-J 917805-J Application Tooling Mini-Applicator Hand Tool ** — ** — — 234170-1 — 234171-1 84696-1 1,— 84695-1 1— Note: Enter the following plating code in Part Number suffix-J: -2 = 0.38 µm thick gold plating, -3 = 0.76µm thick gold plating, -6 = 2.54 µm thick silver plating * Strip Form contacts are used with Mini-Applicator and Loose-Piece contacts are with hand tools. **Mini-Applicator is for use on Automachines. (See next page. Contact Technical Support for details.) •Used to extract contacts from wire type tab / receptacle housing. ( Take care when inserting tool as the lance section of D-5 is turned upside down to that of D-3.) •With D-5 contacts only, it is possible to extract using a small-size slotted screwdriver. When Using D-5 Extraction Tool When Using Slotted Screwdriver The tip of Extraction Tool depresses housing lance, freeing contact. Contact can now be pulled out. When you butt the tip of tool at lance section and depress it, contact is released. Contact can be pulled out. D-5α Contacts (Silver Plating) Wire Range AWG mm2 Ins. Dia. Range mm Wire Range Mark Contact Part Numbers* Receptacle 20 16 16 14 0.50 1.25 1.25 2.20 1.8~3.23 3~3.80 SS S ST. LP. ST. LP. 1318985-6 1318986-6 0179955-6 0316040-6 Application Tooling Mini-Applicator ** — ** — Note: The contact part numbers with "-6" are silver plated with 2.54 µm thickness. * Strip Form contacts are used with Mini-Applicator and Loose-Piece contacts are with hand tools. **Mini-Applicator is for use on Automachines. (See next page. Contact Technical Support for details.) 12 10 8 3.50 5.50 8.00 4~5.2 4.9~7.8 M L ST. LP. ST. LP. 0179956-6 0316041-6 1318696-6 1318697-6 ** — ** — Hand Tool — 91596-1 — 234170-1 — 234171-1 — 1366044-1 |
Số phần tương tự - 2-1102770-5 |
|
Mô tả tương tự - 2-1102770-5 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |