công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LM2453 bảng dữ liệu(PDF) 2 Page - National Semiconductor (TI) |
|
|
LM2453 bảng dữ liệu(HTML) 2 Page - National Semiconductor (TI) |
2 / 14 page Special Features MULTIPLEXED VIDEO SIGNAL INPUT The LM2453 accepts the multiplexed video signal from the LM1253 which contains the video signal and DC clamp level. This multiplexed signal is shown in Figure 3. It was designed to simplify the interface between the pre-amp and CRT Driver. Slightly over 1V of dynamic range is provided for the video and OSD portions of the waveform. The clamp signal control voltage range is approximately 0.9V. The typical numbers for the black and white levels shown correspond to a nominal swing of 40 V P-P (from 25 to 65) at the video out- puts of the LM2453. The clamp pulse lower level is used to set the voltage at the clamp outputs of the LM2453. DS101302-3 FIGURE 3. National LM1253 Multiplexed Video Signal www.national.com 2 |
Số phần tương tự - LM2453 |
|
Mô tả tương tự - LM2453 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |