công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
U1730 bảng dữ liệu(PDF) 5 Page - Agilent(Hewlett-Packard) |
|
U1730 bảng dữ liệu(HTML) 5 Page - Agilent(Hewlett-Packard) |
5 / 11 page 4 U1731C/U1732C/U1733C Electrical Specifications Accuracy is given as ±(% of reading + counts of least significant digit) at 23 °C ± 5 °C, with relative humidity less than 80%. Please refer to the User Guide about the measuring mode specified for each range of L/C/R, series or parallel mode. Measurements performed at the test socket and necessary Open and Short corrections must prior be done. The accuracy is verified by design and specified type tests. Impedance/Resistance Range Resolution Accuracy = AZ + Offset U1731C/U1732C/U1733C U1732C/U1733C U1733C 100 Hz 120 Hz 1 kHz 10 kHz 100 kHz DCR 2 Ω1 0.0001 Ω 0.7% + 50 0.7% + 50 0.7% + 50 0.7% + 50 1.0% + 50 0.7% + 50 20 Ω1 0.001 Ω 0.7% + 8 0.7% + 8 0.7% + 8 0.7% + 8 0.7% + 8 0.7% + 8 200 Ω1 0.01 Ω 0.2% + 3 0.2% + 3 0.2% + 3 0.2% + 3 0.5% + 5 0.2% + 3 2000 Ω 0.1 Ω 0.2% + 3 0.2% + 3 0.2% + 3 0.2% + 3 0.5% + 5 0.2% + 3 20 kΩ 0.001 kΩ 0.2% + 3 0.2% + 3 0.2% + 3 0.2% + 3 0.5% + 5 0.2% + 3 200 kΩ 0.01 kΩ 0.5% + 5 0.5% + 5 0.5% + 5 0.5% + 5 0.7% + 8 0.5% + 5 2000 kΩ 0.1 kΩ 0.5% + 5 0.5% + 5 0.5% + 5 0.7% + 5 NA 0.5% + 5 20 MΩ 0.001 MΩ 2.0% + 8 2.0% + 8 2.0% + 8 5.0% + 8 NA 2.0% + 8 200 MΩ 0.01 MΩ 6.0% + 80 6.0% + 80 6.0% + 80 NA NA 6.0% + 80 1. This accuracy for the ranges of 2~ 200 Ω is specified after Math Null which is used to substrate the resistance of test leads and the contact resistance. Notes: a. For the ranges of 20 MΩ and 200 MΩ, the R.H. is specified for < 60% b. Resistance is specified to Q < 10 and D > 0.1, otherwise the accuracy is (AZ + Offset) x √ 1 + Q2 c. Equivalence Series Resistance (ESR) measurement is determined by impedance measurement and range. The maximum display is up to 199.99 kΩ and the accuracy is (AZ + Offset) x √ 1 + Q2 Capacitance Range Resolution Accuracy = AC + Offset U1731C/U1732C/U1733C U1732C/U1733C U1733C 100 Hz 120 Hz 1 kHz 10 kHz 100 kHz 20 mF 0.001 mF 0.5% + 8 0.5% + 8 NA NA NA 2000 μF 0.1 μF 0.5% + 5 0.5% + 5 0.5% + 8 NA NA 200 μF 0.01 μF 0.3% + 3 0.3% + 3 0.5% + 5 0.5% + 8 NA 20 μF 0.001 μF 0.2% + 3 0.2% + 3 0.2% + 3 0.5% + 5 5.0% + 10 2000 nF 0.1 nF 0.2% + 3 0.2% + 3 0.2% + 3 0.2% + 3 0.7% + 10 200 nF 0.01 nF 0.2% + 3 0.2% + 3 0.2% + 3 0.5% + 3 0.7% + 10 20 nF 0.001 nF 0.5% + 5 0.5% + 5 0.2% + 3 0.5% + 3 0.7% + 10 2000 pF1 0.1 pF 0.5% + 10 0.5% + 10 0.5% + 5 0.5% + 3 2.0% + 10 200 pF1 0.01 pF NA NA 0.5% + 10 0.8% + 10 2.0% + 10 20 pF1 0.001 pF NA NA NA 1.0% + 20 2.5% + 10 1. This accuracy for the ranges of 20 pF~2000 pF is specified after Math Null which is used to substrate the stray capacitances for test leads. Notes: a. The accuracy for the ceramic capacitor will be influenced depending on the dielectric constant (K) of the material used to make the ceramic capacitor. For related influence factors, please refer to the Component dependency factors section in the Impedance Measurement Handbook, downloadable for free at http://www.agilent.com/find/lcrmeters |
Số phần tương tự - U1730 |
|
Mô tả tương tự - U1730 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |