công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LM20502SILT bảng dữ liệu(PDF) 4 Page - Texas Instruments |
|
LM20502SILT bảng dữ liệu(HTML) 4 Page - Texas Instruments |
4 / 37 page LMZ20502 SNVS852C – JUNE 2012 – REVISED APRIL 2015 www.ti.com 7 Specifications 7.1 Absolute Maximum Ratings Under the recommended operating junction temperature range of -40°C to 125°C (unless otherwise noted) (1) MIN MAX UNIT VIN to GND –0.2 6 EN, MODE, FB, PG, to GND(2) –0.2 VIN+0.2 V VOUT to GND(2) –0.2 VIN+0.2 Junction temperature 150 °C Peak soldering reflow temperature for Pb(3) 240 °C Peak soldering reflow temperature for No-Pb(3) 260 Storage temperature range –65 150 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The absolute maximum voltage on this pin must not exceed 6V with respect to ground. Do not allow the voltage on the output pin to exceed the voltage on the input pin by more than 0.2 V. (3) For soldering information, please refer to the following document: SNOA401. 7.2 ESD Ratings VALUE UNIT Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) ±2000 V(ESD) Electrostatic discharge V Charged-device model (CDM), per JEDEC specification JESD22-C101, ±500 all pins(2) (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 7.3 Recommended Operating Conditions Under the recommended operating junction temperature range of -40°C to 125°C (unless otherwise noted) (1) MIN NOM MAX UNIT Input voltage 2.7 5.5 V Output voltage programming 0.8 3.6 V Output voltage range (2) 0 3.6 V Load current 0 2 A Power good flag current 0 4 mA Junction temperature -40 125 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) Under no conditions should the output voltage be allowed to fall below zero volts. 4 Submit Documentation Feedback Copyright © 2012–2015, Texas Instruments Incorporated Product Folder Links: LMZ20502 |
Số phần tương tự - LM20502SILT |
|
Mô tả tương tự - LM20502SILT |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |