LMH0384

www.ti.com

SNLS308G – APRIL 2009 – REVISED JUNE 2015

6 Specifications

6.1 Absolute Maximum Ratings

(1)

MIN

MAX

UNIT

Supply voltage

4.0

V

Input voltage (all inputs)

−0.3

V

Junction temperature

125

°C

Storage temperature

−65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

6.2 ESD Ratings

VALUE

UNIT

±6500

Electrostatic discharge

±2000

V

Machine model (MM)

±400

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. Manufacturing with

less than 500-V HBM is possible with the necessary precautions. Pins listed as ±6500 V may actually have higher performance.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Manufacturing with

less than 250-V CDM is possible with the necessary precautions. Pins listed as ±2000 V may actually have higher performance.

6.3 Recommended Operating Conditions

MIN

NOM

MAX

UNIT

Supply Voltage

3.135

3.3

3.465

V

Input Coupling Capacitance

1

µF

AEC Capacitor (Connected between AEC+ and AEC-)

1

µF

Operating Free Air Temperature

−40

85

°C

6.4 Thermal Information

LMH0384

WQFN (RUM)

UNIT

16 PINS

Junction-to-ambient thermal resistance

40

°C/W

Junction-to-case (top) thermal resistance

6

°C/W

(1)

For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application

report, SPRA953.

6.5 DC Electrical Characteristics

Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.

(1) (2) (3) (4)

PARAMETER

TEST CONDITIONS

MIN

TYP

MAX

UNIT

Input Voltage High Level (Logic Inputs)

2

V

Input Voltage Low Level

0.8

V

Input Voltage Swing (SDI, SDI)

720

800

950

Input Common-Mode Voltage (SDI, SDI)

1.75

V

(1)

Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated

(2)

(3)

Typical pullup or pulldown for digital pin is 100 k

Ω.

(4)

Due to SMPTE naming convention, all SMPTE Engineering Documents will be numbered as a two-letter prefix and a number.

Documents and references with the same root number and year are functionally identical; for example ST 424-2006 and SMPTE 424M-

2006l refer to the same document.

(5)

The LMH0384 can be optimized for different launch amplitudes through the SPI.

Copyright © 2009–2015, Texas Instruments Incorporated

Submit Documentation Feedback

5

Product Folder Links: LMH0384