công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LM139AWG/883 bảng dữ liệu(PDF) 8 Page - Texas Instruments |
|
|
LM139AWG/883 bảng dữ liệu(HTML) 8 Page - Texas Instruments |
8 / 29 page LM139AQML, LM139QML SNOSAH8G – FEBRUARY 2005 – REVISED MARCH 2013 www.ti.com LM139A 883, QMLV & RH, SMD 5962–9673801 Electrical Characteristics DC/AC Parameters 50K Post Rad Limits +25°C (1) The following conditions apply, unless otherwise specified. DC: +V = 5V, VCM = 0V AC: +V = 5V Symbol Parameters Conditions Sub- Notes Min Max Unit groups VIO Input Offset Voltage +V = 5V, VCM = 0 -2.5 2.5 mV 1 +V = 30V, VCM = 0 -2.5 2.5 mV 1 +V = 30V, VCM = 28.5V, -2.5 2.5 mV 1 VO = 1.5V ± IBias Input Bias Current VO = 1.5V See(2) -110 -1.0 nA 1 tRLH Response Time VOD (Overdrive) = 50mV 0.9 µS 4 (1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the “Post Radiation Limits” table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are ensured only for the conditions as specified in Mil-Std-883, Method 1019, Condition A. (2) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the reference or input lines. LM139A 883, QMLV & RH, SMD 5962–9673801 Electrical Characteristics DC/AC Parameters 100K Post Rad Limits +25° (1) (2) The following conditions apply, unless otherwise specified. DC: +V = 5V, VCM = 0V AC: +V = 5V Symbol Parameters Conditions Sub- Notes Min Max Unit groups VIO Input Offset Voltage +V = 5V, VCM = 0 -4.0 4.0 mV 1 +V = 30V, VCM = 0 -4.0 4.0 mV 1 +V = 30V, VCM = 28.5V, -4.0 4.0 mV 1 VO = 1.5V ± IBias Input Bias Current VO = 1.5V See(3) -110 -1.0 nA 1 tRLH Response Time VOD (Overdrive) = 50mV 1.0 µS 4 (1) Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the “Post Radiation Limits” table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are ensured only for the conditions as specified in Mil-Std-883, Method 1019, Condition A. (2) Low dose rate testing has been performed on a wafer-by-wafer basis, per test method 1019, condition D, MIL-STD-883, with no enhanced low dose rate sensitivity (ELDRS) effect. Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics, except as listed in the “Post Radiation Limits” table. Radiation end point limits for the noted parameters are ensured for only the conditions as specified in MIL-STD-883, Method 1019, condition D. (3) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the reference or input lines. 8 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM139AQML LM139QML |
Số phần tương tự - LM139AWG/883 |
|
Mô tả tương tự - LM139AWG/883 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |