công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ADS5277 bảng dữ liệu(PDF) 5 Page - Texas Instruments |
|
ADS5277 bảng dữ liệu(HTML) 5 Page - Texas Instruments |
5 / 33 page ADS5277 www.ti.com............................................................................................................................................ SBAS333D – FEBRUARY 2005 – REVISED JANUARY 2009 ELECTRICAL CHARACTERISTICS (continued) TMIN = –40°C and TMAX = +85°C. Typical values are at TA = +25°C, sampling rate = 65MSPS, 50% clock duty cycle, AVDD = 3.3V, LVDD = 3.3V, –1dBFS, ISET = 56.2kΩ, internal voltage reference, and LVDS buffer current at 3.5mA per channel, unless otherwise noted. All values are applicable after the device has been reset. ADS5277 PARAMETER TEST CONDITIONS MIN TYP MAX UNITS ANALOG INPUT Differential Input Capacitance 4.0 pF Analog Input Common-Mode Range VCM ± 50 mV Differential Full-Scale Input Voltage Range Internal Reference 2.03 VPP External Reference 2.03 × (VREFT – VREFB) VPP Voltage Overload Recovery Time(7) 3.0 CLK Cycles –3dBFS, 25 Ω Series Input Bandwidth 300 MHz Resistances DIGITAL INPUTS VIH High Level Input Voltage 2.2 V VIL Low Level Input Voltage 0.6 V CIN Input Capacitance 3 pF DIGITAL DATA OUTPUTS Data Format Straight Offset Binary Data Bit Rate 240 780 Mbps SERIAL INTERFACE SCLK Serial Clock Input Frequency 20 MHz (7) A differential ON/OFF pulse is applied to the ADC input. The differential amplitude of the pulse in its ON (high) state is twice the full-scale range of the ADC, while the differential amplitude of the pulse in its OFF (low) state is zero. The overload recovery time of the ADC is measured as the time required by the ADC output code to settle within 1% of full-scale, as measured from its mid-code value when the pulse is switched from ON (high) to OFF (low). REFERENCE SELECTION MODE INT/EXT DESCRIPTION Internal Reference; FSR = 2.03VPP 1 Default with internal pull-up. Internal reference is powered down. The common-mode voltage External Reference; FSR = 2.03 × (VREFT – VREFB) 0 of the external reference should be within 50mV of VCM. VCM is derived from the internal bandgap voltage. Copyright © 2005–2009, Texas Instruments Incorporated Submit Documentation Feedback 5 Product Folder Link(s): ADS5277 |
Số phần tương tự - ADS5277_14 |
|
Mô tả tương tự - ADS5277_14 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |