ADC121S625

www.ti.com

SNAS294B – MAY 2005 – REVISED MARCH 2013

Absolute Maximum Ratings

(1) (2) (3)

−0.3V to 6.5V

Voltage on Any Pin to GND

±10 mA

±50 mA

Human Body Model

2500V

Machine Model

250V

Charge Device Modeling (CDM)

750V

Soldering Temperature, Infrared,

260°C

Junction Temperature

+150°C

Storage Temperature

−65°C to +150°C

(1)

Absolute maximum ratings are limiting values which indicate limits beyond which damage to the device may occur. Operating Ratings

indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test

conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance

characteristics may degrade when the device is not operated under the listed test conditions.

(2)

All voltages are measured with respect to GND = 0V, unless otherwise specified.

(3)

If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.

(4)

limited to 10 mA. The 50 mA maximum package input current rating limits the number of pins that can safely exceed the power supplies

with an input current of 10 mA to five.

(5)

operated in a severe fault condition (e.g. when input or output pins are driven beyond the power supply voltages, or the power supply

polarity is reversed). Obviously, such conditions should always be avoided.

(6)

Human body model is 100 pF capacitor discharged through a 1.5 k

Ω resistor. Machine model is 220 pF discharged through ZERO

ohms.

(7)

See AN450, “Surface Mounting Methods and Their Effect on Product Reliability”, or the section entitled “Surface Mount” found in any

post 1986 Texas Instruments Linear Data Book, for other methods of soldering surface mount devices.

Operating Ratings

(1) (2)

Operating Temperature Range

+4.5V to +5.5V

+0.1V to 2.5V

See Figure 51

Digital Input Pins Voltage Range

Clock Frequency

0.8 MHz to 3.2 MHz

Differential Analog Input Voltage

(1)

Absolute maximum ratings are limiting values which indicate limits beyond which damage to the device may occur. Operating Ratings

indicate conditions for which the device is functional, but do not ensure specific performance limits. For ensured specifications and test

conditions, see the Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance

characteristics may degrade when the device is not operated under the listed test conditions.

(2)

All voltages are measured with respect to GND = 0V, unless otherwise specified.

Copyright © 2005–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: ADC121S625