1

Cascadable Thin Film Amplifier,

13 dB Gain, 5 - 1000 MHz

Rev. V4

AM-176 / AMC-176

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 4.0 dB Typical Noise Figure

 13.5 dBm Typical Midband 1 dB Compression

Description

M/A-COM’s AM-176 is a feedback amplifier with high

intercept and compression points. This amplifier is

packaged in a TO-8 package. Due to the internal

power dissipation the thermal rise should be

minimized. The ground plane on the PC board

should be configured to remove heat from under the

package. AM-176 is ideally suited for use where a

high intercept, high reliability amplifier is required.

TO-8-1

Parameter

Absolute Maximum

Max. Input Power

+10 dBm

Vbias

+15.75 V

Operating Temperature

-55°C to +85°C

Storage Temperature

-65°C to +125°C

1. Operation of this device above any one of these parameters

may cause permanent damage.

Ordering Information

Part Number

Package

AM-176 PIN

TO-8-1

AMC-176 SMA

Connectorized