công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TS33001-M000QFNR bảng dữ liệu(PDF) 4 Page - Semtech Corporation |
|
TS33001-M000QFNR bảng dữ liệu(HTML) 4 Page - Semtech Corporation |
4 / 16 page TS33001/2/3 Final Datasheet Rev 1.6 January 15, 2016 www.semtech.com 4 of 16 Semtech Proprietary & Confidential Absolute Maximum Rating Over operating free–air temperature range unless otherwise noted(1, 2) Parameter Value Unit VCC -0.3 to 6.0 V VSW -1 to 6.0 V EN, PG,FB, nLP, TEST OUT, V OUT Sense -0.3 to 6 V Electrostatic Discharge – Human Body Model ±2k V Electrostatic Discharge – Charge Device Model ±500 V Lead Temperature (soldering, 10 seconds) 260 °C Notes: (1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating con- ditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to network ground terminal. Thermal Characteristics Symbol Parameter Value Unit θ JA Thermal Resistance Junction to Air (Note 1) 50 °C/W Note 1: Assumes QFN16 1 in2 area of 2 oz copper and 25°C ambient temperature. Recommended Operating Conditions Symbol Parameter Min Typ Max Unit VCC Input Operating Voltage 2.375 5 5.5 V T STG Storage Temperature Range -65 150 °C T J MAX Maximum Junction Temperature 150 °C T J Operating Junction Temperature Range -40 125 °C L OUT Output Filter Inductor Typical Value (Note 1,3) 1 µH C OUT Output Filter Capacitor Typical Value (Note 2,3) 10 µF C OUT-ESR Output Filter Capacitor ESR 0 5 20 mΩ C BYPASS Input Supply Bypass Capacitor Typical Value (Note 2) 22 µF Note 1: For best performance, an inductor with a saturation current rating higher than the maximum Vout load requirement plus the inductor current ripple. See the inductor current ripple calculations in inductor calculations sections. Note 2: For best performance, a low ESR ceramic capacitor should be used – X7R or X5R types should be used. Y5V should be avoided. Note 3: Min and max listed are to account for +/-20% variation of the typical value. Typical values of 10uF and 0.47uH are recommended. |
Số phần tương tự - TS33001-M000QFNR |
|
Mô tả tương tự - TS33001-M000QFNR |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |