3.3-V or 5-V regulated

0.1 F

µ

5-V accessory

9

SN74AHC1G04

www.ti.com

SCLS318T – MARCH 1996 – REVISED JANUARY 2016

Product Folder Links: SN74AHC1G04

Submit Documentation Feedback

Copyright © 1996–2016, Texas Instruments Incorporated

9 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

9.1 Application Information

SN74AHC1G04 is a low-drive CMOS device that can be used for a multitude of inverting buffer type functions. It

can produce 8 mA of drive current at 5 V, making it Ideal for driving multiple outputs and good for low-noise

9.2 Typical Application

Figure 5. Typical Application Schematic

9.2.1 Design Requirements

This device uses CMOS technology and has balanced output drive. Care should be taken to avoid bus

contention because it can drive currents that would exceed maximum limits. The high drive will also create fast

edges into light loads, so routing and load conditions should be considered to prevent ringing.

9.2.2 Detailed Design Procedure

1. Recommended Input Conditions

–

For rise time and fall time specifications, see

Δt/ΔV in the Recommended Operating Conditions table.

–

–

2. Recommend Output Conditions

–

Load currents should not exceed 25 mA per output and 50 mA total for the part.

–