công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SMDA15-6 bảng dữ liệu(PDF) 1 Page - Microsemi Corporation |
|
SMDA15-6 bảng dữ liệu(HTML) 1 Page - Microsemi Corporation |
1 / 2 page MSC0332A.PDF ISO 9001 CERTIFIED REV M 7/06/2000 8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 DESCRIPTION (300 watt) This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in an SO-8 configuration giving protection to 6 Unidirectional data or interface lines. It is designed for use in applications where protection can be provided at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These TVS arrays have a peak power rating of 300 watts for an 8/20 µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, and I/O transceivers. The SMDAXX-6 product provides board level protection from static electricity and other induced voltage surges that can damage sensitive circuitry. FEATURES MECHANICAL • Protects up to 6 Unidirectional lines • Molded SO-8 Surface Mount • Surge protection Per IEC 1000-4-2, IEC 1000-4-4 • Weight: 0.066 grams (approximate) • SO-8 Packaging • Marking: Logo, device number, date code • Pin #1 defined by DOT on top of package MAXIMUM RATINGS PACKAGING • Operating Temperatures: -55 0C to +1500C • Tape & Reel EIA Standard 481-1-A • Storage Temperature: -55 0C to +1500C • 13 inch reel 2,500, pieces (OPTIONAL) • Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1) • Carrier tubes 95 pcs per (STANDARD) • Pulse Repetition Rate: <.01% ELECTRICAL CHARACTERISTICS PER LINE @ 25 0C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE VBR @1 mA VOLTS CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS LEAKAGE CURRENT ID @ VWM µA CAPACITANCE (f=1 MHz) @0V C pF TEMPERATURE COEFFICIENT OF VBR áVBR mV/°C PART NUMBER DEVICE MARKING MAX MIN MAX MAX MAX TYP MAX SMDA03-6 SDK6 3.3 4 7 9 200 800 -3 SMDA05-6 SDA6 5.0 6.0 9.8 11 20 550 3 SMDA12-6 SDC6 12.0 13.3 19.0 24 1 185 10 SMDA15-6 SDE6 15.0 16.7 24.0 30 1 140 13 SMDA24-6 SDG6 24.0 26.7 43.0 55 1 88 30 NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. Application: The SMDAXX-6 product is designed for transient voltage suppression protection of ESD sensitive components at the board level. It is an ideal product to be used for protection of I/O Transceivers. SMDA03-6 thru SMDA24-6 TVSarray ™ ™ Series |
Số phần tương tự - SMDA15-6 |
|
Mô tả tương tự - SMDA15-6 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |