công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TA100W-11 bảng dữ liệu(PDF) 2 Page - MORNSUN Science& Technology Ltd. |
|
TA100W-11 bảng dữ liệu(HTML) 2 Page - MORNSUN Science& Technology Ltd. |
2 / 4 page The copyright and authority for the interpretation of the products are reserved by MORNSUN TAxxxW-xx 2013.04.10-A/2 Page 2 of 4 No-load Voltage 24V ±10% Distribution (Isolators with isolated power output) Full-load Voltage ≥20V Input Signal See selection guide ≤2V(Current input @20mA) Field Area Input Impedance ≥100KΩ(Voltage input) Output Signal See selection guide Ripple & Noise ≤60mVp-p ≤500Ω(@maximum output current) Control Area Load ≥1000Ω(@maximum output voltage) TRANSMISSION CHARACTERISTICS Zero Offset 0.1%F.S. Accuracy 0.1%F.S. Gain Error 0.1%F.S. Temperature drift coefficient 0.0035%F.S./℃(-25℃~+71 Operating temperature range ℃ ) ISOLATION CHARACTERISTICS Electrical Isolation Three-port isolation (input, output and power supply) 2.0KVAC,3.0KVDC between application field and control cabinet 2.0KVAC,3.0KVDC between signal input or output and power supply Isolation Voltage 2.0KVAC,3.0KVDC between channels ( multi-channel products ) Test conditions: testing for 1minute, humidity < 70%, leakage current < 1mA EMC CHARACTERISTICS RE CISPR22/EN55022 CLASS A EMI CE CISPR22/EN55022 CLASS A ESD IEC/EN61000-4-2 Contact ±4KV / Air ±8KV perf. Criteria B IEC/EN61000-4-4 DC Power Port ±2KV perf. Criteria B EFT IEC/EN61000-4-4 I/O Signal Port ±1KV perf. Criteria B IEC/EN61000-4-5 DC Power Port ±1KV /±2KV perf. Criteria B Surge IEC/EN61000-4-5 I/O Signal Port ±1KV(Line to GND) perf. Criteria B OTHER CHARACTERISTICS Operating temperature range: -25 °C ~ +71°C Ambient temperature Transport and storage temperature: -40 °C ~ +85°C Package 35mm DIN-rail package: T-rail card package (DIN50022), pluggable connection pin, thickness 12.50mm Safety Class IP20(IEC60529 / EN60529) Weight 1 input 1 output: about 100g;2 input 2 output & 1 input 2 output: about128g CONNECTION 1. Connection used dismountable terminals; 2. Cross section area of wiring: 0.5mm 2 ~2.5 mm2; 3. The length of bare wire is about 8mm, locked up by the M3 bolt. Application in industry In the field application, isolator should not be installed In intrinsically safe area. Selection guidelines for Isolator or Isolator with isolation power output 1. Take care of output independence of isolator or isolator with isolation power output and loop resistance to make sure the its output voltage meets the minimum operation voltage requirement of field device. 2. Select suitable isolator which matches the field device according to its power polarity, signal type and transmission mode. Operation notes 1. Please read the user manual carefully before using. If any question please contact our technical support department. 2. Please do not use this product in hazardous area. 3. The power supply of this product should be 24VDC power source. It is forbidden to use 220VAC power supply. 4. To avoid invalid explosion protection function, or any failure, users disassemble this product is forbidden. |
Số phần tương tự - TA100W-11 |
|
Mô tả tương tự - TA100W-11 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |