công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TS30013 bảng dữ liệu(PDF) 4 Page - List of Unclassifed Manufacturers |
|
TS30013 bảng dữ liệu(HTML) 4 Page - List of Unclassifed Manufacturers |
4 / 18 page - 4 - TS30011/12/13 Version 1.6 Specifications subject to change WWW.TRIUNESYSTEMS.COM Copyright © 2012, Triune Systems, LLC ABSOLUTE MAXIMUM RATINGS Over operating free–air temperature range unless otherwise noted(1, 2) Parameter Value Unit VCC -0.3 to 26.4 (-0.3 to 20 for TS30013) V BST -0.3 to (VCC+6) V VSW -1 to 26.4 (-1 to 20 for TS30013) V EN, PG,FB -0.3 to 6 V Electrostatic Discharge – Human Body Model +/-2k V Electrostatic Discharge – Charge Device Model +/-500 V Lead Temperature (soldering, 10 seconds) 260 C (1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to network ground terminal. THERMAL CHARACTERISTICS Symbol Parameter Value Unit JA Thermal Resistance Junction to Air (Note 1) 34.5 °C/W JC Thermal Resistance Junction to Case (Note 1) 2.5 °C/W TSTG Storage Temperature Range -65 to 150 °C TJ MAX Maximum Junction Temperature 150 °C TJ Operating Junction Temperature Range -40 to 125 °C Note 1: Assumes 16LD 3x3 QFN with hi-K JEDEC board and 13.5 inch2 of 1 oz Cu and 4 thermal vias connected to PAD RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Typ Max Unit VCC Input Operating Voltage 4.5 12 24 (18 for TS30013) V CBST Bootstrap Capacitor 17.6 22 26.4 nF LOUT Output Filter Inductor Typical Value (Note 1) 3.76 4.7 5.64 uH COUT Output Filter Capacitor Typical Value (Note 2) 33 44 (2 x 22) uF COUT-ESR Output Filter Capacitor ESR 2 100 m CBYPASS Input Supply Bypass Capacitor Typical Value (Note 3) 8 10 uF Note 1: For best performance, an inductor with a saturation current rating higher than the maximum VOUT load requirement plus the inductor current ripple. Note 2: For best performance, a low ESR ceramic capacitor should be used. Note 3: For best performance, a low ESR ceramic capacitor should be used. If CBYPASS is not a low ESR ceramic capacitor, a 0.1uF ceramic capacitor should be added in parallel to CBYPASS. |
Số phần tương tự - TS30013 |
|
Mô tả tương tự - TS30013 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |