công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TC1107-3.3VUA bảng dữ liệu(PDF) 4 Page - Microchip Technology |
|
TC1107-3.3VUA bảng dữ liệu(HTML) 4 Page - Microchip Technology |
4 / 12 page TC1107 DS21356B-page 4 © 2002 Microchip Technology Inc. 3.0 DETAILED DESCRIPTION The TC1107 is a precision regulator available in fixed voltages. Unlike bipolar regulators, the TC1107’s supply current does not increase with load current. In addition, VOUT remains stable and within regulation over the entire 0mA to IOUTMAX operating load current range, (an important consideration in RTC and CMOS RAM battery back-up applications). Figure 3-1 shows a typical application circuit. The regulator is enabled any time the shutdown input (SHDN)isatorabove VIH, and shutdown (disabled) when SHDN is at or below VIL. SHDN may be controlled by a CMOS logic gate, or I/O port of a microcontroller. If the SHDN input is not required, it should be connected directly to the input supply. While in shutdown, supply current decreases to 0.05 µA (typical), VOUT falls to zero. FIGURE 3-1: TYPICAL APPLICATION CIRCUIT 3.1 Output Capacitor A1 µF(min) capacitor from VOUT to ground is required. The output capacitor should have an effective series resistance greater than 0.1 Ω and less than 5.0Ω.A 1µF capacitor should be connected from VIN to GND if there is more than 10 inches of wire between the regulator and the AC filter capacitor, or if a battery is used as the power source. Aluminum electrolytic or tantalum capacitor types can be used. (Since many aluminum electrolytic capacitors freeze at approximately -30°C, solid tantalums are recommended for applications operating below -25°C.) When operating from sources other than batteries, supply-noise rejection and transient response can be improved by increasing the value of the input and output capacitors and employing passive filtering techniques. 3.2 Bypass Input A 470pF capacitor connected from the Bypass input to ground reduces noise present on the internal reference, which in turn significantly reduces output noise. If output noise is not a concern, this input may be left unconnected. Larger capacitor values may be used, but results in a longer time period to rated output voltage when power is initially applied. TC1107 1 2 3 4 5 6 7 8 VOUT VOUT CBYPASS Shutdown Control (from Power Control Logic) C2 1 µF GND NC Bypass VIN NC NC SHDN C1 1 µF Battery + + + – 470pF (Optional) |
Số phần tương tự - TC1107-3.3VUA |
|
Mô tả tương tự - TC1107-3.3VUA |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |