công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ADA-JET-CTI20 bảng dữ liệu(PDF) 9 Page - Analog Devices |
|
ADA-JET-CTI20 bảng dữ liệu(HTML) 9 Page - Analog Devices |
9 / 19 page J T A G P R OB E S F OR S I GN U M E M ULATO RS T E CHNI CA L S P E C IF IC A TION S 7 ARM Cortex Probe ADA-ARM20-Cortex This passive adapter allows you to interface any Signum JTAGjet emulator that uses the 20-pin JTAG probe for ARM (ADA-JET-ARM20 or its low-voltage variant ADA-JET-ARM20-LV) with a Cortext-M target board. Both 20-pin and 10-pin high-density Cortex connectors are supported, but only one of them can be used at a time. The ARM connector of the probe has the pinout of the ADA-JET-ARM20 probe (Figure 2). The pinouts of the 20-pin and 10-pin Cortex connectors are shown in Figure 13 and Figure 14 (page 5), respectively. Ribbon Cable D C L FIGURE 15 The ADA-ARM20-SWD probe for the JTAGjet. FIGURE 16 The dimensions of the ADA-ARM20-SWD probe. C = 23.6 mm (0.93 in), D = 3.11 mm (0.122 in), H = 5.1 mm (0.2 in), L = 69.3 mm (2.73 in), W = 15.73 (0.62 in), W1 = 10.5 mm (0.41 in), W2 = 16.9 mm (0.67). The mating JTAG headers for targets are the same as those for the ADA-ARM-SWD probe (Table 4 on page 6 ). Pin 1 20-pin ARM Connector Pin 1 Pin 1 |
Số phần tương tự - ADA-JET-CTI20 |
|
Mô tả tương tự - ADA-JET-CTI20 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |