LM567, LM567C

SNOSBQ4D – MAY 1999 – REVISED MARCH 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ABSOLUTE MAXIMUM RATINGS

(1) (2) (3)

Supply Voltage Pin

9V

1100 mW

15V

−10V

Storage Temperature Range

−65°C to +150°C

Operating Temperature Range

LM567H

−55°C to +125°C

LM567CH, LM567CM, LM567CN

0°C to +70°C

Soldering Information

PDIP Package

Soldering (10 sec.)

260°C

SOIC Package

Vapor Phase (60 sec.)

215°C

Infrared (15 sec.)

220°C

See http://www.ti.com for other methods of soldering surface mount devices.

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state DC and AC electrical

specifications under particular test conditions which ensure specific performance limits. This assumes that the device is within the

Operating Ratings. Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication

of device performance.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and

specifications.

(3)

Refer to RETS567X drawing for specifications of military LM567H version.

(4)

The maximum junction temperature of the LM567 and LM567C is 150°C. For operating at elevated temperatures, devices in the TO-5

package must be derated based on a thermal resistance of 150°C/W, junction to ambient or 45°C/W, junction to case. For the DIP the

device must be derated based on a thermal resistance of 110°C/W, junction to ambient. For the SOIC package, the device must be

derated based on a thermal resistance of 160°C/W, junction to ambient.

ELECTRICAL CHARACTERISTICS

LM567

LM567C/LM567CM

Parameters

Conditions

Units

Min

Typ

Max

Min

Typ

Max

Power Supply Voltage Range

4.75

5.0

9.0

4.75

5.0

9.0

V

Power Supply Current Quiescent

6

8

7

10

mA

Power Supply Current Activated

11

13

12

15

mA

Input Resistance

18

20

15

20

k

Ω

Smallest Detectable Input Voltage

20

25

20

25

mVrms

Largest No Output Input Voltage

10

15

10

15

mVrms

Largest Simultaneous Outband Signal to

6

6

dB

Inband Signal Ratio

Minimum Input Signal to Wideband Noise

−6

−6

dB

Ratio

Largest Detection Bandwidth

12

14

16

10

14

18

Largest Detection Bandwidth Skew

1

2

2

3

Largest Detection Bandwidth Variation with

±0.1

±0.1

%/°C

Temperature

Largest Detection Bandwidth Variation with

4.75–6.75V

±1

±2

±1

±5

%V

Supply Voltage

Highest Center Frequency

100

500

100

500

kHz

2

Submit Documentation Feedback

Copyright © 1999–2013, Texas Instruments Incorporated

Product Folder Links: LM567 LM567C