AM2381P

Analog Power

PRELIMINARY

Publication Order Number:

DS-AM2381_A

2

Notes

a.

Pulse test: PW <= 300us duty cycle <= 2%.

b.

Guaranteed by design, not subject to production testing.

Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation

or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or

use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental

damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and

actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by

customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed,

intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or

sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur.

Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its

officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney

fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer.

Min

Typ

Max

Gate-Threshold Voltage

-1.2

V

Gate-Body Leakage

±100

nA

-1

-10

On-State Drain Current

A

-1

A

0.5

0.6

Forward Tranconductance

A

2.2

S

Diode Forward Voltage

0.8

V

Total Gate Charge

7

Gate-Source Charge

1

Gate-Drain Charge

2

Turn-On Delay Time

7

Rise Time

11

Turn-Off Delay Time

17

Fall-Time

11

, ID = -1 A,

VGEN = -10 V, RG = 6

nS

nC

Drain-Source On-Resistance

A

Dynamic

b

Static

Zero Gate Voltage Drain Current

uA

Parameter

Symbol

Test Conditions

Limits

Unit