công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
L78MS05J bảng dữ liệu(PDF) 4 Page - Sanyo Semicon Device |
|
L78MS05J bảng dữ liệu(HTML) 4 Page - Sanyo Semicon Device |
4 / 7 page L78MS05J/L78S05JSMP No.7161-4/7 Block Diagram Stipulated Test Circuits Application Notes Notes: 1. CIN and COUT must be located as close as possible to the IC to stabilize IC operation. 2. COUT must be 0.1µF or larger, and a capacitor (such as a tantalum capacitor) with a low temperature coefficient must be used to prevent oscillation at low temperatures. 3. If the STB pin is open, the internal bias will result in the output going to the on state. If the STB function is not used, the STB pin must be connected to ground to complete the STB operation. 4. Note that a large current will flow if the IC is connected in reverse, that is, if VIN is connected to - and GND is connected to +. |
Số phần tương tự - L78MS05J_06 |
|
Mô tả tương tự - L78MS05J_06 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |