công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STK4065 bảng dữ liệu(PDF) 3 Page - Sanyo Semicon Device |
|
STK4065 bảng dữ liệu(HTML) 3 Page - Sanyo Semicon Device |
3 / 9 page STK4065 No. 2148—3/9 Test Circuit Notes for Applying the STK4065 (1) VCC max The STK4065 is designed as an amplifier for car use and its VCC max at the operating mode is set to 18V. When this voltage is exceeded, the overvoltage protec- tor will work to bring the circuit to OFF-state, deliver- ing no output. The overvoltage protector is so designed as to work at a voltage of 18V to 28V. The protector works 100% at 28V. When designing an audio set, such as home stereo, using a transformer power supply, con- sider AC line regulation and be careful that 18V must not be exceeded at the quiescent mode. If 18V is exceeded, the overvoltage protector will work, generat- ing an abnormal sound. (2) Protectors a) Output pin-to-VCC short, output pin-to-GND short pro- tectors The STK4065 contains protectors against output pin- to-VCC short and output pin-to-GND short. The output pin-to-VCC short protector works effec- tively to protect the IC when the power switch is turned ON at the output pin-to-VCC short state, but does not work to protect the IC when output pin-to-VCC short is forced to be provided at the normal operation mode after the power switch is turned ON. The output pin-to-VCC short protector is intended to protect the IC against damage when pin-to-pin short occurs in the assembly process. If there is possibility that output pin-to-VCC short is caused by the user, the auxiliary output pin-to-VCC short protector shown on page 5 must be connected externally. The output pin-to-GND short protector works effectively to protect the IC against damage when the power switch is turned ON at the output Pin- to-GND short state and also when output pin-to-GND short is forced to be provided at the normal operation mode after the power switch in turned ON. b) Thermal shutdown The STK4065 contains thermal protectors. The thermal protector detects abnormal temperature rise caused when the IC operates abnormally (load short, etc.), limits the input signal, and prevents tem- perature from rising, preventing the IC from breaking down in a short time. The thermal protector starts working at approximately 135 °C of substrate tempera- ture Tc and turns OFF the input signal at approxi- mately 175 °C. |
Số phần tương tự - STK4065 |
|
Mô tả tương tự - STK4065 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |