công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STK402-120 bảng dữ liệu(PDF) 2 Page - Sanyo Semicon Device |
|
STK402-120 bảng dữ liệu(HTML) 2 Page - Sanyo Semicon Device |
2 / 6 page No. 7047-2/6 STK402-070 Item Type No. STK402-020 STK402-030 STK402-040 STK402-050 STK402-070 STK402-090 STK402-100 STK402-120 Output 1 (10%/1 kHz) 20 W + 20 W 30 W + 30 W 40 W + 40 W 45 W +45 W 60 W + 60 W 80 W + 80 W 100 W + 100 W 120 W + 120 W Output 2 (0.4%/20 Hz to 20 kHz) 15 W + 15 W 20 W + 20 W 25 W + 25 W 30 W + 30 W 40 W + 40 W 50 W + 50 W 60 W + 60 W 80 W + 80 W Maximum supply voltage ±30 V ±34 V ±38 V ±40 V ±50 V ±54 V ±57 V ±65 V (No signal) Maximum supply voltage ±28 V ±32 V ±36 V ±38 V ±44 V ±47 V ±50 V ±57 V (6 Ω) Recommended supply voltage ±19 V ±22 V ±25 V ±26.5 V ±30 V ±32 V ±35 V ±39 V (6 Ω) Package 46.6 mm × 25.5 mm × 8.5 mm 59.2 mm × 31.0 mm × 8.5 mm Series Organization Parameter Symbol Conditions Ratings Unit Maximum supply voltage (No signal) VCC max(0) ±50 V Maximum supply voltage VCC max(1) RL = 6 Ω ±44 V Thermal resistance θj-c Per power transistor 3.2 °C/W Junction temperature Tj max Both the Tj max and the Tc max conditions must be met. 150 °C Operating IC substrate temperature Tc max 125 °C Storage temperature Tstg –30 to +125 °C Allowable load shorted time ts VCC = ±30.0 V, RL = 6 Ω, f = 50 Hz, PO = 40 W 0.3 s Specifications Maximum Ratings at Ta = 25°C These products are organized as a series based on their output capacity. Parameter Symbol Conditions*1 Ratings Unit VCC (V) f (Hz) PO (W) THD (%) min typ max Output power PO (1) ±30.0 20 to 20 k 0.4 38 40 W (continuous output) PO (2) ±30.0 1 k 10 60 Total harmonic distortion THD (1) ±30.0 20 to 20 k 1.0 VG = 30 dB 0.4 % THD (2) ±30.0 1 k 5.0 VG = 30 dB 0.01 Frequency characteristics fL, fH ±30.0 1.0 +0 –3 dB 20 to 50 k Hz Input impedance ri ±30.0 1 k 1.0 55 k Ω Output noise voltage *2 VNO ±36.0 Rg = 2.2 k Ω 1.2 mVrms Quiescent current ICCO ±36.0 10 40 80 mA Neutral voltage VN ±36.0 –70 0 +70 mV Operating Characteristics at Ta = 25°C, RL = 6 Ω (noninductive load), Rg = 600 Ω, VG = 30 dB Notes: 1. Unless otherwise noted, use a constant-voltage supply for the power supply used during inspection. 2. The output noise voltage values shown are peak values read with a VTVM. However, an AC stabilized (50 Hz) power supply should be used to minimize the influence of AC primary side flicker noise on the reading. Use the transformer power supply circuit stipulated in the figure below for output noise voltage measurement. 3. Use the transformer power supply circuit stipulated in the figure below for allowable load shorted time measurement. DBA40C 10000 µF 10000 µF 500 Ω 500 Ω +VCC --VCC Stipulated Transformer Power Supply (MG-200 equivalent) |
Số phần tương tự - STK402-120 |
|
Mô tả tương tự - STK402-120 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |