công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LC78833 bảng dữ liệu(PDF) 7 Page - Sanyo Semicon Device |
|
LC78833 bảng dữ liệu(HTML) 7 Page - Sanyo Semicon Device |
7 / 11 page 3. Initialization These ICs must be initialized when power is first applied and when the system clock frequency is changed. Initialization is performed by applying a low level to the INITB pin. That low level must be held for at least one full cycle of the LRCK signal after the power supply voltage has stabilized and the SYSCLK, BCLK, and LRCK signals have been applied. When INITB is low, all 16 bits of the digital filter outputs go to 0, and the D/A converter outputs (CH1OUT and CH2OUT) go to the analog 0 level, which is a potential equal to (REFH +REFL)/2. 4. System Clock These ICs support a 384fs system clock. Apply a 384fs clock to the SYSCLK pin. • CKOUT pin The SYSCLK and CKOUT pins are related as shown in the figure below. No. 5212-7/11 LC78833M, 78833V |
Số phần tương tự - LC78833 |
|
Mô tả tương tự - LC78833 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |