công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
X-10GD bảng dữ liệu(PDF) 3 Page - Omron Electronics LLC |
|
X-10GD bảng dữ liệu(HTML) 3 Page - Omron Electronics LLC |
3 / 8 page General-purpose Basic Switch X 143 Engineering Data ■ Mechanical Durability (X-10G) ■ Electrical Durability (X-10G) ■ Structure Contact Form (SPDT) Note: With the reverse-type models (X-10GM @), the NC and NO terminal arrangements are reversed. Dimensions Note: Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions. ■ Terminals Screw Terminals (-B) Solder Terminal (Blank) Note: 1. Appropriate terminal screw tightening torque: 0.78 to 1.18 N·m. 2. In case of DC voltage, set the COM to the positive terminal. ■ Mounting All switches can be mounted using M4 mounting screws with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 1.18 to 1.47 N·m. Versions with panel mount plungers can be panel mounted via the plunger, provided that the hexagonal nut of the actuator is tightened to a torque of 2.94 to 4.9 N·m. Note: Mount using either the side mounting holes or the panel mount plunger, not both. If using the side mounting holes, then remove the hexagonal nut(s) from the panel mount plunger. 50 70 100 20 30 500 700 1,000 3,000 5,000 200 300 10 0.2 0.1 0.4 0.6 0.9 0.8 0.3 0.5 0.7 Overtravel (mm) 0 Ambient temperature: 20 ±2°C Ambient humidity: 65 ±5%RH Without load Operating frequency: 240 operations/min 214 610 4 8 12 Switching current (A) 0 Ambient temperature: 20 ±2°C Ambient humidity: 65 ±5%RH Operating frequency: 20 operations/min 125 VDC L/R = 7 ms 125 VDC L/R = 0 5 7 10 2 3 50 70 100 200 300 500 20 30 1 (+) COM NC NO COM NO NC 13 2 17.45±0.2 49.2 Three, M4 x 5.5 Terminal screws (with toothed washer) 9.2 20 20 COM NO NC 1 2 3 49.2 11.9 25.4±0.1 6.4 17.45±0.2 25.4±0.1 Two, 4.2-dia. mounting holes or M4 screw holes Panel Mount Plunger Panel Mount Roller Plunger 12.5 dia. +0.2 0 12.5 dia. +0.2 0 13+0.2 0 5+0.2 0 Accessories (Terminal Covers, Actuators, and Separators): Refer to ‘Z/A/X/DZ Common Accessories’ datasheet |
Số phần tương tự - X-10GD |
|
Mô tả tương tự - X-10GD |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |