công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MCP73832-5ACI/OT bảng dữ liệu(PDF) 1 Page - Microchip Technology |
|
MCP73832-5ACI/OT bảng dữ liệu(HTML) 1 Page - Microchip Technology |
1 / 28 page © 2008 Microchip Technology Inc. DS21984E-page 1 MCP73831/2 Features • Linear Charge Management Controller: - Integrated Pass Transistor - Integrated Current Sense - Reverse Discharge Protection • High Accuracy Preset Voltage Regulation: + 0.75% • Four Voltage Regulation Options: - 4.20V, 4.35V, 4.40V, 4.50V • Programmable Charge Current: 15 mA to 500 mA • Selectable Preconditioning: - 10%, 20%, 40%, or Disable • Selectable End-of-Charge Control: - 5%, 7.5%, 10%, or 20% • Charge Status Output - Tri-State Output - MCP73831 - Open-Drain Output - MCP73832 • Automatic Power-Down • Thermal Regulation • Temperature Range: -40°C to +85°C • Packaging: - 8-Lead, 2 mm x 3 mm DFN - 5-Lead, SOT-23 Applications • Lithium-Ion/Lithium-Polymer Battery Chargers • Personal Data Assistants • Cellular Telephones • Digital Cameras • MP3 Players • Bluetooth Headsets • USB Chargers Typical Application Description: The MCP73831/2 devices are highly advanced linear charge management controllers for use in space-lim- ited, cost-sensitive applications. The MCP73831/2 are available in an 8-Lead, 2 mm x 3 mm DFN package or a 5-Lead, SOT-23 package. Along with their small physical size, the low number of external components required make the MCP73831/2 ideally suited for portable applications. For applications charging from a USB port, the MCP73831/2 adhere to all the specifications governing the USB power bus. The MCP73831/2 employ a constant-current/constant- voltage charge algorithm with selectable precondition- ing and charge termination. The constant voltage regulation is fixed with four available options: 4.20V, 4.35V, 4.40V or 4.50V, to accommodate new, emerging battery charging requirements. The constant current value is set with one external resistor. The MCP73831/ 2 devices limit the charge current based on die temper- ature during high power or high ambient conditions. This thermal regulation optimizes the charge cycle time while maintaining device reliability. Several options are available for the preconditioning threshold, preconditioning current value, charge termination value and automatic recharge threshold. The preconditioning value and charge termination value are set as a ratio, or percentage, of the programmed constant current value. Preconditioning can be disabled. Refer to Section 1.0 “Electrical Characteristics” for available options and the “Prod- uct Identification System” for standard options. The MCP73831/2 devices are fully specified over the ambient temperature range of -40°C to +85°C. Package Types STAT VDD VSS PROG VBAT + - Single Li-Ion Cell 4 MCP73831 5 3 1 500 mA Li-Ion Battery Charger 2 VIN 4.7 μF 470 Ω 2k Ω 4.7 μF VBAT VSS VDD 1 2 3 5 4 PROG STAT MCP73831/2 2×3 DFN* VBAT VDD VBAT NC VSS 1 2 3 4 8 7 6 5 STAT PROG VDD * Includes Exposed Thermal Pad (EP); see Table 3-1. EP 9 MCP73831/2 SOT-23-5 Miniature Single-Cell, Fully Integrated Li-Ion, Li-Polymer Charge Management Controllers |
Số phần tương tự - MCP73832-5ACI/OT |
|
Mô tả tương tự - MCP73832-5ACI/OT |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |