công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ST72T101G2M3 bảng dữ liệu(PDF) 9 Page - STMicroelectronics |
|
ST72T101G2M3 bảng dữ liệu(HTML) 9 Page - STMicroelectronics |
9 / 84 page 9/84 ST72101/ST72212/ST72213 1.3 EXTERNAL CONNECTIONS The following figure shows the recommended ex- ternal connections for the device. The VPP pin is only used for programming OTP and EPROM devices and must be tied to ground in user mode. The 10 nF and 0.1 µF decoupling capacitors on the power supply lines are a suggested EMC per- formance/cost tradeoff. The external reset network is intended to protect the device against parasitic resets, especially in noisy environments. Unused I/Os should be tied high to avoid any un- necessary power consumption on floating lines. An alternative solution is to program the unused ports as inputs with pull-up. Figure 8. Recommended External Connections VPP VDD VSS OSCIN OSCOUT RESET VDD 0.1 µF + See Clocks Section VDD 0.1 µF 0.1 µF EXTERNAL RESET CIRCUIT Or configure unused I/O ports Unused I/O 10nF 4.7K 10K by software as input with pull-up VDD 9 |
Số phần tương tự - ST72T101G2M3 |
|
Mô tả tương tự - ST72T101G2M3 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |