STn8815P14

STn8815P14 overview

5/22

●

Color LCD controller for STN or TFT panels or display interface for display module

–

24-bpp true color

–

MIPI™ legacy DBI and DPI

●

Two high speed USB 2.0 On-The-Go controller interfaces (12 and 480 Mbit/s)

–

ULPI v1.1 compliance

–

ULPI SDR support, DDR not supported

●

Host port interface

●

I/O peripherals

–

3 autobaud UARTs (one with modem control signals) up to 6 Mbit/s

–

One IrDA (SIR/MIR/FIR) interface up to 4 Mbit/s

–

One synchronous serial port (SSP) up to 24 Mbit/s

–

4 multichannel serial ports (MSP) up to 48 Mbit/s

–

3 I²C master/slave interfaces, 1 dedicated to SIA

–

Two 8-channel, full-duplex high-speed serial interfaces, 110 Mbit/s (MIPI legacy

HSI)

–

Rotary encoder interface; keypad matrix interface

●

124 general-purpose I/Os (muxed with peripheral I/Os)

●

System and peripheral controller

–

Multichannel DMA controller

–

64-source interrupt controller

–

Eight 32-bit timers/counters

–

Real-time clock (RTC)

–

Real-time timer (RTT)

–

Watchdog timer

●

Programmable PLL for CPU and system clocks

●

Two crystal oscillators:

32 kHz and 13/19.2 MHz

●

JTAG IEEE 1149.1 boundary scan

●

Supply voltages

–

1.2 V to 1.4 V logic; 1.8 V to 2.5 V I/O, PLL analog; 2.5 V OTP

●

VFBGA memory stackable (package on package)

14 mm x 14 mm x 1.0 mm, pitch 0.5 mm, 464 balls

a.

1-Wire is a registered trademark of Dallas Semiconductor.