Accessories

Cassette Style Mating Connectors H11, H15, H15S2, H15S4

SEP 29, 2003 revised to MAY 24, 2006

Page 9 of 9

www.power-one.com

110

20.2

Modification for use with Retension Clip

Fig. 18

Cable hood for H15 and H15S4 connectors

Cable Hood

A cable connector housing or cable hood is available for all

female H15, H15S2 and H15S4 type connectors with faston

terminals (not suited for screw terminals). It serves as a

strain relief, isolates connections and protects cables.

Item number:

KSG-H15/H15S4

Reference:

HZZ00141

Delivery content: Housing shell, cable duct with covers,

cable clip, cable boot and screws

If using the cable hood together with retention clips, a

special version is available, where both sides of the hood

are slightly modified in order to allow for insertion of the

clips. The cable hood with retention clips has been tested to

withstand vibrations according to IEC/EN 60068-2-6: 5 g,

7.5 h (2.5 h per axis).

Item number:

KSG-H15/H15S4-V

Reference:

HZZ00142

Delivery content: Housing shell, cable duct with covers,

cable clip, cable boot and screws

Cable Hood Retention Brackets CHRB

The cable hood can also be fixed to the converter case

with two U-shaped cable hood retention brackets.

Available for H, M, K, PSK, PSS, PSL, S, T series.

Item number:

CHRB-KSG

Reference:

HZZ01218

Delivery content: 2 brackets with 2 screws

European

Projection

Fig. 19

Cable hood retention bracket CHRB

NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical

components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written

consent of the respective divisional president of Power-One, Inc.

TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending

on the date manufactured. Specifications are subject to change without notice.