Accessories

Cassette Style Mating Connectors H11, H15, H15S2, H15S4

SEP 29, 2003 revised to MAY 24, 2006

Page 8 of 9

www.power-one.com

Extraction Tool for High Current

Contacts

High current plugs and jacks can be disassembled from the

moulding by means of a special Extraction Tool (H15 S2,

H15 S4). Holding the extraction tool over the centre of the

connector's female contact the outer part of the extraction

tool should be fed between the moulding and the outside of

the female contact itself. This releases the spring clip fixing

the contacts, in order to pull the contacts out of their

moulding for replacement. If the operation is performed

correctly very little force is required. Extreme care should

be taken since incorrect procedure and excessive force

could damage the tool and/or connector.

This tool is available as an accessory for both screw or

solder high current contacts.

Note: In order to avoid damage, never manipulate high

current contacts when plugged-in!

Description:

Extraction tool

Reference:

HZZ00150

Connector Retention Clips V

The retention clip V is an accessory which guarantees

secure connection even under severe vibration, as for

example in mobile applications. One connector retention

system fits to almost all units and all of the aforementioned

connector types.

The following converter series are delivered with pre-

punched holes in the back plate for fast field-mounting of

retention clips:

H, M, K, PSK, PSL, PSS, S and T (Q, LPC, P series only in

combination with Mounting Plate Q [HZZ01215])

Description:

Retentionclip (2x)

Reference:

HZZ01209

Delivery content:

2 pcs.

Connector retention clips (unlocked)

Connector retention clips (locked)

Fig. 16

Connector retention clips

Fig. 15

Extraction tool

Connector Retention Brackets CRB

An alternative to the above mentioned retention clip V is the

connector retention bracket. They are attached to the back

plate by one screw each with a torque of 20 to 30 Ncm.

Table 5: Connector Retention Bracket Survey

Connector

Item number

Delivery

series

[Reference]

content

H, M, PSL

CRB-HKMS

2 brackets

K, PSK

[HZZ01216]

2 screws

S, PSS

2 washers

T

Q, P

CRB-Q

LPC

[HZZ01217]

Fig. 17

Connector retention bracket CRB