công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TS1852ID bảng dữ liệu(PDF) 3 Page - STMicroelectronics |
|
TS1852ID bảng dữ liệu(HTML) 3 Page - STMicroelectronics |
3 / 25 page TS1851-TS1852-TS1854 Absolute maximum ratings 3/25 1 Absolute maximum ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage (1) 7V Vid Differential input voltage(2) ±1 V Vi Input voltage Vdd -0.3 to VCC +0.3 V Toper Operating free air temperature range -40 to + 125 °C Tstg Storage temperature -65 to +150 °C Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction to ambient (3) SOT23-5 DIP8 DIP14 miniSO-8 SO-8 SO-14 TSSOP8 TSSOP14 250 85 66 190 125 103 120 100 °C/W Rthjc Thermal resistance junction to case SOT23-5 DIP8 DIP14 miniSO-8 SO-8 SO-14 TSSOP8 TSSOP14 81 41 33 39 40 31 37 32 °C/W ESD HBM: human body model(4) 2kV MM: machine model(5) 200 V CDM: charged device model(6) 1.5 kV Lead temperature (soldering, 10sec) 250 °C Output short-circuit duration see note(7) 1. All voltage values, except differential voltage are with respect to network terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. If Vid > ±1V, the maximum input current must not exceed ±1mA. When Vid > ±1V, add an input series resistor to limit input current. 3. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. 4. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5k Ω resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 5. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of connected pin combinations while the other pins are floating. 6. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins. 7. Short-circuits from the output to VCC can cause excessive heating. The maximum output current is approximately 48mA, independent of the magnitude of VCC. Destructive dissipation can result from simultaneous short-circuits on all amplifiers. |
Số phần tương tự - TS1852ID |
|
Mô tả tương tự - TS1852ID |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |