công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AZP94NAG bảng dữ liệu(PDF) 1 Page - Arizona Microtek, Inc |
|
AZP94NAG bảng dữ liệu(HTML) 1 Page - Arizona Microtek, Inc |
1 / 8 page AZP94 ECL/PECL ÷1, ÷2 Clock Generation Chip with Tristate Compatible Outputs 1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (623) 505-2414 www.azmicrotek.com ARIZONA MICROTEK, INC. FEATURES • Green and RoHS Compliant / Lead (Pb) Free Package Available • 3.0V to 5.5V Operation • Selectable Divide Ratio • Selectable Enable Polarity and Threshold (CMOS/TTL or PECL) • Tristate Compatible Outputs • Input Buffer Powers Down when Disabled • Selectable Input Biasing • High Bandwidth for ≥1GHz • Available in a MLP 8 (2x2) Package • S Parameter and IBIS Model Files Available on Arizona Microtek Website DESCRIPTION The AZP94 is a specialized ÷1 or ÷2 clock generation part including an enable/reset function. The divide ratio is selected with the DIV-SEL pin/pad. When DIV-SEL is open (NC), the AZP94 functions as a standard receiver. If DIV-SEL is connected to VEE, it functions as a ÷2 divider. Enable (EN) functionality is selected with the EN-SEL pin/pad which has three valid states: open (NC), VEE, or connected to VEE via a 20kΩ ± 20% resistor. Leaving EN-SEL open or connecting it to VEE allows the EN pin/pad to function as an active high CMOS/TTL enable. When EN-SEL is open, an internal 75k Ω pull-up resistor is selected which enables the outputs whenever EN is left open. When EN-SEL is connected to VEE, an internal 75kΩ pull- down resistor is selected which disables the outputs whenever EN is left open. Connecting the EN-SEL to VEE with a 20kΩ resistor will allow the EN pin/pad to function as an active low PECL/ECL enable with an internal 75k Ω pull-down resistor. In this mode, outputs are enabled when EN is left open (NC). The default logic condition can be overridden by connecting the EN to VCC with an external resistor of ≤20kΩ. If the enable signal is CMOS (rail-to-rail) and the logic sense is active low (EN-SEL connected to VEE with a 20k Ω resistor), the EN pin/pad voltage swing must be reduced using two external resistors. Contact the factory for details. When the AZP94 is disabled, the Q and Q ¯ outputs are forced LOW and the input buffer is powered down to minimize feed through. This feature allows tristate compatible parallel output connections. Multiple AZP94 chip outputs can be wired together. Since both outputs are forced LOW in the disable mode, an enabled AZP94 can drive the output lines without interference from the unselected units. In addition, the AZP94 can be used in parallel connection with PECL/ECL parts whose outputs are high impedance when disabled. The EN pin/pad also functions as a reset when the ÷2 mode is selected. In the ÷2 mode, the counter resets when the outputs are disabled. PACKAGE AVAILABILITY PACKAGE PART NO. MARKING NOTES MLP 8 (2x2) Green / RoHS Compliant / Lead (Pb) Free AZP94NAG J4G <Date Code> 1,2 1 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. 2 Date code format: “Y” for year followed by “WW” for week. |
Số phần tương tự - AZP94NAG |
|
Mô tả tương tự - AZP94NAG |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |