Banner Engineering Corp.
9714 Tenth Ave. No. Minneapolis, MN 55441
Telephone: (612) 544-3164
FAX (applications): (612) 544-
3573
WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will repair or replace,
free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not
cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
SMB500
Universal steel mounting bracket for 512 Series
sensors permits adjustment in both axes. Also
available in stainless steel (order model
SMB500SS).
PVC-6
PVC-30
These are 6 and 30-foot lengths of flexible
steel conduit and may be used with any of the
512 Series sensors and the CF7-16 fitting to
provide protection to the sensor cable.
Size: I.D. = 5/16"; O.D. = 7/16".
These are 6 and 30-foot lengths of plastic
(PVC) flexible tubing for use with the 512
Series sensors and the CF7-16 in food applica-
tions where flexible steel conduit is not al-
lowed.
Size: I.D. = 1/4"; O.D. = 3/8".
AC-6
AC-30
L52
FOF500
Extends range of SM512DB and SM512DBX
by about 50% and reduces beam diameter.
Fiberoptic interface block. Creates a fiberoptic
sensor from SM512DB or SM512DBX.
Contact factory for ranges.
Aluminum compression fitting for the cable
entrance at the rear of the 512 Series sensors.
May be used with either plastic or flexible steel
conduit (PVC-6 or AC-6).
CF7-16
SM512 Series Diffuse Mode Sensors
Accessories and Modifications for SM512 Series Sensors