công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MC-7893 bảng dữ liệu(PDF) 4 Page - California Eastern Labs |
|
MC-7893 bảng dữ liệu(HTML) 4 Page - California Eastern Labs |
4 / 7 page MC-7893 NOTES ON CORRECT USE (1) The space between PC board and root of the lead should be kept more than 1 mm to prevent undesired stress to the lead and also should be kept less than 4 mm to prevent undesired parasitic inductance. Recommended that space is 2.0 to 3.0 mm typical. (2) Recommended torque strength of the screw is 59 to 78 Ncm. (3) Form the ground pattern as wide as possible to minimize ground impedance. (to prevent undesired oscillation) All the ground pins must be connected together with wide ground pattern to decrease impedance difference. RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Soldering Conditions Recommended Condition Symbol Partial Heating Peak temperature (pin temperature) : 350 °C or below Note Soldering time (per pin of device) : 3 seconds or less − Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead. Data Sheet PG10560EJ02V0DS 4 |
Số phần tương tự - MC-7893_06 |
|
Mô tả tương tự - MC-7893_06 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |