LMV331 SINGLE, LMV393 DUAL, LMV339 QUAD

GENERALPURPOSE LOW VOLTAGE COMPARATORS

SLCS136M − AUGUST 1999 − REVISED NOVEMBER 2005

2

POST OFFICE BOX 655303

symbol (each comparator)

−

OUT

IN−

IN+

+

simplified schematic

IN+

IN−

OUT

GND

R1

R2

R3

Q1

Q2

Q3

Q4

Q5

M

Q7

Q6

VCC+

5.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±5.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

0 V to 5.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Package thermal impedance,

97

°C/W

. . . . . . . . . . . . . . . . . . . . . .

D (14-pin) package

86

°C/W

. . . . . . . . . . . . . . . . . . . .

DBV package

206

°C/W

. . . . . . . . . . . . . . . . . . . . . . .

DCK package

252

°C/W

. . . . . . . . . . . . . . . . . . . . . . .

DDU package

TBD

°C/W

. . . . . . . . . . . . . . . . . . . . . . .

DGK package

172

°C/W

. . . . . . . . . . . . . . . . . . . . . . .

PW (8-pin) package

149

°C/W

. . . . . . . . . . . . . . . . . .

PW (14-pin) package

113

°C/W

. . . . . . . . . . . . . . . . . .

150

°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. All voltage values (except differential voltages and VCC+ specified for the measurement of IOS) are with respect to the network GND.

2. Differential voltages are at IN+ with respect to IN−.

3. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable

ambient temperature is PD = (TJ(max) − TA)/θJA. Selecting the maximum of 150°C can affect reliability.

4. The package thermal impedance is calculated in accordance with JESD 51-7.