công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MC10192 bảng dữ liệu(PDF) 2 Page - ON Semiconductor |
|
MC10192 bảng dữ liệu(HTML) 2 Page - ON Semiconductor |
2 / 4 page MC10192 http://onsemi.com 2 ELECTRICAL CHARACTERISTICS Test Limits Pin Under –30 °C +25 °C +85 °C Characteristic Symbol Under Test Min Max Min Max Min Max Unit Power Supply Drain Current IE 8 154 140 154 mAdc Input Current IinH 5 350 220 220 µAdc IinL 5 0.5 0.5 0.3 µAdc Output Current High Logic 1 IOH 2 2.0 mAdc Output Current Low Logic 0 IOL 2 13.5 18.0 14.0 18.0 14.0 19.0 mAdc Threshold Current High Logic 1 IOHC 2 2.0 2.0 2.0 mAdc Threshold Current Low Logic 0 IOLC 2 13.5 14.0 14.0 mAdc Output Sink Current Low Logic 0 IOS 2 13.3 13.9 13.3 mAdc Load Return Voltage Absolute Max Rating (Note 1.) VLR 5.5 5.5 5.5 V Output Voltage Low (Note 2.) VOLS –2.4 V Switching Times (50 Ω Load) ns Propagation Delay E to Output D to Output tPHL tPLH 2.0 1.5 6.0 4.5 Rise/Fall Time (20 to 80%) tTLH tTHL 3.3 1. The 5.5V value is a maximum rating, do not exceed. A 270 Ω resistor will prevent output transistor breakdown. 2. Limitations of load resistor and load return voltage combinations. Refer to page 1 description. ELECTRICAL CHARACTERISTICS (continued) TEST VOLTAGE VALUES (Volts) @ Test Temperature VIHmax VILmin VIHAmin VILAmax VEE –30 °C –0.890 –1.890 –1.205 –1.500 –5.2 +25 °C –0.810 –1.850 –1.105 –1.475 –5.2 +85 °C –0.700 –1.825 –1.035 –1.440 –5.2 Pin Under TEST VOLTAGE APPLIED TO PINS LISTED BELOW (V ) Characteristic Symbol Under Test VIHmax VILmin VIHAmin VILAmax VEE (VCC) Gnd Power Supply Drain Current IE 8 8 16 Input Current IinH 5 5 8 16 IinL 5 5 8 16 Output Current High Logic 1 IOH 2 5,6,10,11 8 16 Output Current Low Logic 0 IOL 2 5,6,10,11 8 16 Threshold Current High Logic 1 IOHC 2 5,7,9,10,11 6 8 16 Threshold Current Low Logic 0 IOLC 5,10,11 7,9 6 8 16 Output Sink Current Low Logic 0 IOS 2 5,6,10,11 8 16 Load Return Voltage Absolute Max Rating (Note 1.) VLR 8 16 Output Voltage Low (Note 2.) VOLS 8 16 Each MECL 10,000 series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 linear fpm is maintained. Outputs are terminated through a 50–ohm resistor to –2.0 volts. Test procedures are shown for only one gate. The other gates are tested in the same manner. |
Số phần tương tự - MC10192 |
|
Mô tả tương tự - MC10192 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |