công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MC74LVXT8051M bảng dữ liệu(PDF) 3 Page - ON Semiconductor |
|
MC74LVXT8051M bảng dữ liệu(HTML) 3 Page - ON Semiconductor |
3 / 12 page MC74LVXT8051 http://onsemi.com 3 MAXIMUM RATINGS Symbol Parameter Value Unit VCC Positive DC Supply Voltage (Referenced to GND) – 0.5 to + 7.0 V VIS Analog Input Voltage − 0.5 to VCC + 0.5 V Vin Digital Input Voltage (Referenced to GND) – 0.5 to VCC + 0.5 V I DC Current, Into or Out of Any Pin −20 mA PD Power Dissipation in Still Air, SOIC Package† TSSOP Package† 500 450 mW Tstg Storage Temperature Range – 65 to + 150 _C TL Lead Temperature, 1 mm from Case for 10 Seconds 260 _C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. †Derating − SOIC Package: – 7 mW/ _C from 65_ to 125_C TSSOP Package: − 6.1 mW/ _C from 65_ to 125_C RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit VCC Positive DC Supply Voltage (Referenced to GND) 2.0 6.0 V VIS Analog Input Voltage 0.0 VCC V Vin Digital Input Voltage (Referenced to GND) GND VCC V VIO* Static or Dynamic Voltage Across Switch 1.2 V TA Operating Temperature Range, All Package Types – 55 + 85 _C tr, tf Input Rise/Fall Time (Channel Select or Enable Inputs) VCC = 3.3 V ± 0.3 V VCC = 5.0 V ± 0.5 V 0 0 100 20 ns/V *For voltage drops across switch greater than 1.2 V (switch on), excessive VCC current may be drawn; i.e., the current out of the switch may contain both VCC and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded. DC CHARACTERISTICS − Digital Section (Voltages Referenced to GND) VCC Guaranteed Limit Symbol Parameter Condition VCC V −55 to 25 °C ≤85°C ≤125°C Unit VIH Minimum High−Level Input Voltage, Channel−Select or Enable Inputs Ron = Per Spec 3.0 4.5 5.5 1.2 2.0 2.0 1.2 2.0 2.0 1.2 2.0 2.0 V VIL Maximum Low−Level Input Voltage, Channel−Select or Enable Inputs Ron = Per Spec 3.0 4.5 5.5 0.53 0.8 0.8 0.53 0.8 0.8 0.53 0.8 0.8 V Iin Maximum Input Leakage Current, Channel−Select or Enable Inputs Vin = VCC or GND 5.5 ± 0.1 ± 1.0 ± 1.0 mA ICC Maximum Quiescent Supply Current (per Package) Channel Select, Enable and VIS = VCC or GND; VIO = 0 V 5.5 4 40 160 mA This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high−impedance cir- cuit. For proper operation, Vin and Vout should be constrained to the range GND v (Vin or Vout) v VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. |
Số phần tương tự - MC74LVXT8051M |
|
Mô tả tương tự - MC74LVXT8051M |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |