ADG1334

Rev. 0 | Page 7 of 12

TERMINOLOGY

Ohmic resistance between D and S.

Source leakage current when switch is off.

Drain leakage current when switch is off.

Channel leakage current when switch is on.

Analog voltage on Terminal D, Terminal S.

Channel input capacitance for off condition.

Channel output capacitance for off condition.

On switch capacitance.

Digital input capacitance.

The delay between applying the digital control input and the

output switching on (see Figure 14).

The delay between applying the digital control input and the

output switching off (see Figure 14).

Off time measured between the 80% point of both switches

when switching from one address state to another.

Maximum input voltage for Logic 0.

Minimum input voltage for Logic 1.

Input current of the digital input.

Positive supply current.

Negative supply current.

Off Isolation

A measure of unwanted signal coupling through an off channel.

Charge Injection

A measure of the glitch impulse transferred from the digital

input to the analog output during switching.

Bandwidth

Frequency at which the output is attenuated by 3 dB.

On Response

Frequency response of the on switch.