công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MCH318FN106KK bảng dữ liệu(PDF) 5 Page - Rohm |
|
MCH318FN106KK bảng dữ liệu(HTML) 5 Page - Rohm |
5 / 11 page MCH31 Ceramic capacitors 5/10 Items Performance Vibration Test Method (As per JIS C 5101-1, JIS C 5101-10) As per 4.17 of JIS C 5101-1. The specimens shall be soldered on the specified test jig. Initial measurements shall be made after the thermal pre-conditioning specified in Remarks(1). Final measurements shall be made after the specimens have been left at room temperature as per Table3. [Condition] Directions : 2h each X, Y and Z directions Total : 6h Frequency range : 10 to 55 to 10Hz(1min) Applitude : 1.5mm (shall not exceed acceleration196m/s2) As per 4.16 of JIS C 5101-1 As per 4.12 of JIS C 5101-10 The specimens shall be soldered on the test jig shown in Remarks. Temperature cycle : 100cycles Initial measurements prior to test shall be performed after the thermal per-conditioning specified in Remarks (1). Final measurements shall be made after the specimens have been left at room temperature as per Table3. No. 11 Temperature cycling 12 Dielectric loss tangent A, A N C N C N Rated vcoltage 25V,16V,10V Rated vcoltage 6.3V F N F N Capacitance shall be within specified tolerance range. Within +/−7.5% Within +/−7.5% Within +/−15% Within +/−20% Within +/−20% Within +/−2.5% Appearance Dielectric loss tangent Within specified initial value. Change rate from initial value A, A N Change rate from initial value Without mechanical damage. Without mechanical damage. Appearance Within specified initial value. Insulation resistance Within specified initial value. Withstanding voltage No defects shall be allowed. Table3 24 +/−2 h 48 +/−4 h Charac- teristic Time A, AN CN, FN Table3 24 +/−2 h 48 +/−4 h Charac- teristic Time A, AN CN, FN 30 +/−3 30 +/−3 Test condition Step 1 2 3 4 Temp. ( °C) Time (min) Min operating temp. Room temp. Room temp. Max operating temp. 3 <− 3 <− As per 4.35 of JIS C 5101-1. As per 4.9 of JIS C 5101-10 Glass epoxy board with soldered specimens shall be bent till 1mm by 1.0mm/s. Bending strength 10 Appearance Without mechanical damage. |
Số phần tương tự - MCH318FN106KK |
|
Mô tả tương tự - MCH318FN106KK |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |