công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
NTP53X2 bảng dữ liệu(PDF) 28 Page - NXP Semiconductors |
|
NTP53X2 bảng dữ liệu(HTML) 28 Page - NXP Semiconductors |
28 / 133 page NXP Semiconductors NTP53x2 NTAG 5 link - NFC Forum-compliant I2C bridge NTP53x2 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved. Product data sheet Rev. 3.3 — 3 July 2020 COMPANY PUBLIC 544533 28 / 133 Block Address NFC I2C Byte 0 Byte 1 Byte 2 Byte 3 Description 25h 1025h NFC_PWD5_ 0 (LSB) NFC_PWD5_1 NFC_PWD5_2 NFC_PWD5_ 3 (MSB) AREA_1 Read Password 26h 1026h NFC_PWD6_ 0 (LSB) NFC_PWD6_1 NFC_PWD6_2 NFC_PWD6_ 3 (MSB) AREA_1 Write Password For I2C password authentication, there are four 32-bit I2C passwords (default value of all password bytes is 00h) which can be read or written by the host depending on the I2C Key Header configuration. Table 28. I2C Password location Block Address NFC I2C Byte 0 Byte 1 Byte 2 Byte 3 Description 33h 1033h I2C_PWD0_ 0 (LSB) I2C_PWD0_1 I2C_PWD0_2 I2C_PWD0_ 3 (MSB) Read Password 34h 1034h I2C_PWD1_ 0 (LSB) I2C_PWD1_1 I2C_PWD1_2 I2C_PWD1_ 3 (MSB) Write Password 35h 1035h I2C_ PWD2_ 0 (LSB) I2C_PWD2_1 I2C_PWD2_2 I2C_PWD2_ 3 (MSB) AREA_1 Read Password 36h 1036h I2C_ PWD3_ 0 (LSB) I2C_PWD3_1 I2C_PWD3_2 I2C_PWD3_ 3 (MSB) AREA_1 Write Password Password authentication from I2C perspective is done by using I2C write command with the password to the I2C Key authenticate location. This will make the I2C logic to enter the Authenticated state if the key matches with the respective key. Table 29. I2C Key Authenticate Password location Block Address Byte 0 Byte 1 Byte 2 Byte 3 1096h I2C_PWD0_ 0_AUTH (LSB) I2C_PWD0_ 1_AUTH I2C_PWD0_ 2_AUTH I2C_PWD0_3_ AUTH (MSB) Read Authenticate 1097h I2C_PWD1_ 0_AUTH (LSB) I2C_PWD1_ 1_AUTH I2C_PWD1_ 2_AUTH I2C_PWD1_3_ AUTH (MSB) Write Authenticate 1098h I2C_PWD2_ 0_AUTH (LSB) I2C_PWD2_ 1_AUTH I2C_PWD2_ 2_AUTH I2C_PWD2_3_ AUTH (MSB) AREA_1 Read Authenticate 1099h I2C_PWD3_ 0_AUTH (LSB) I2C_PWD3_ 1_AUTH I2C_PWD3_ 2_AUTH I2C_PWD3_3_ AUTH (MSB) AREA_1Write Authenticate 8.1.3.10 I2C Key Header The Host interface can access the user memory with I2C READ and I2C WRITE commands. The memory access may be protected by plain password depending on the access conditions. The programming of I2C Key Header can be done in only one direction from lower state to higher state and it is irreversible. The NFC interface can access this block with READ CONFIG and WRITE CONFIG commands if not locked by NFC section lock. Once locked as per table below, I2C_KH cannot be updated from the NFC interface anymore. |
Số phần tương tự - NTP53X2 |
|
Mô tả tương tự - NTP53X2 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |