công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TLE8110ED bảng dữ liệu(PDF) 52 Page - Infineon Technologies AG |
|
TLE8110ED bảng dữ liệu(HTML) 52 Page - Infineon Technologies AG |
52 / 74 page Data Sheet 52 Rev. 1.0 2018-03-07 TLE8110ED Smart Multichannel Low Side Switch with Parallel Control and SPI Interface Control of the device 12.3.1 CMD - Commands By using the Address Range CMD[14:12] = ’000’ commands can be send to the device. The feedback of the commands is provided in the next SPI SO frame. Details about the Feedback on each command is described in the Chapter 12.3.1.1. It is possible to perform per each Communication Frame ONE command out of Group-A (see following description of the commands) and ONE command out of Group-B at the same time. Performing more then one Command of one Group is not possible. For the case, this happens, the commands are ignored. Overview Commands CMD Command Register S_SI Serial Input CMD 11 10 987 6543 210 RSD 0 1110 0000 001 RSDS 0 1110 0000 010 RPC 0 1110 0000 100 RINx 0 1110 0001 000 CSDS 0 1110 0010 000 NOP 0 1110 0000 000 Command description Field Command Type Function Command Bits Group-B (Bits [7:4]). All other bit combinations are not valid. Command will be ignored then. NOP 0000 W NOP - no operation A frame with 0000H will be returned. CMD_CSDS 0001 W CMD_CSDS - Command: Clear Short Diagnosis and Device Status Clear the Device Status information. Performing this Clear Command clears the Information in the Reset and Communication Error Information as long as the incident is not present anymore. If the incident is still present, the related Bits remain setted. Performing this command does NOT clear the Diagnosis Registers. The Diagnosis Information is cleared by the Clear Diagnosis Commands (see Chapter 12.3.2). SO returns a Frame with 0000H after performing CMD_CSDS or in case this command is carried out together with a command out of Group-A, the feedback is according the Group-A command. Command Bits Group-A (Bits [3:0]). All other bit combinations are not valid. Command will be ignored then. CMD_NOP 0000 W NOP - no operation A frame with 0000H will be returned. CMD_RINx 1000 W CMD_RINx - Command: Return Input Pin INx -Status See Chapter 12.3.1.4. CMD_RPC 0100 W CMD_PRC - Command: Return Pattern Check See Chapter 12.3.1.3. |
Số phần tương tự - TLE8110ED |
|
Mô tả tương tự - TLE8110ED |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |