công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
EVK-NINA-B1 bảng dữ liệu(PDF) 11 Page - u-blox AG |
|
EVK-NINA-B1 bảng dữ liệu(HTML) 11 Page - u-blox AG |
11 / 21 page EVK-NINA-B1 - User guide UBX-15028120 - R11 Product description Page 11 of 21 Figure 6: Peripherals connection pin header of EVK-NINA-B1 1.7.3 NFC antenna interface The NFC antenna interface is available on the J11 connector. The default configuration is shown in Figure 7. 0 Ω resistors are mounted on R15 and R16. This connects the J11 NFC antenna connector to pins 28 and 29 of the NINA-B1 module. If NFC is not needed, and pins 28 and 29 are used as GPIOs available on connector J3, then resistors on R15 and R16 should be removed and instead mounted on R13 and R14. Figure 7: NFC antenna interface J11 of EVK-NINA-B1 1.7.4 Current measurement The EVK-NINA-B1 offers the possibility to measure current consumption for the NINA-B1 module. Figure 8: Current measurement pin header J15 of EVK-NINA-B1 The current consumption for the NINA-B1 module on the EVK-NINA-B1 can be measured in two ways as explained in the following subsections. |
Số phần tương tự - EVK-NINA-B1 |
|
Mô tả tương tự - EVK-NINA-B1 |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |