MC74HC00A

http://onsemi.com

2

MAXIMUM RATINGS

Symbol

Parameter

Value

Unit

DC Supply Voltage (Referenced to GND)

– 0.5 to + 7.0

V

DC Input Voltage (Referenced to GND)

V

DC Output Voltage (Referenced to GND)

V

DC Input Current, per Pin

± 20

mA

DC Output Current, per Pin

± 25

mA

± 50

mA

Power Dissipation in Still Air,

Plastic DIP†

SOIC Package†

TSSOP Package†

750

500

450

mW

Storage Temperature

– 65 to + 150

_C

Lead Temperature, 1 mm from Case for 10 Seconds

Plastic DIP, SOIC or TSSOP Package

260

_C

Maximum ratings are those values beyond which device damage can occur. Maximum ratings

applied to the device are individual stress limit values (not normal operating conditions) and are

not valid simultaneously. If these limits are exceeded, device functional operation is not implied,

damage may occur and reliability may be affected.

†Derating — Plastic DIP: – 10 mW/

_C from 65_ to 125_C

SOIC Package: – 7 mW/

_C from 65_ to 125_C

TSSOP Package: − 6.1 mW/

_C from 65_ to 125_C

For high frequency or heavy load considerations, see Chapter 2 of the ON Semiconductor High−Speed CMOS Data Book (DL129/D).

RECOMMENDED OPERATING CONDITIONS

Symbol

Parameter

Min

Max

Unit

DC Supply Voltage (Referenced to GND)

2.0

6.0

V

DC Input Voltage, Output Voltage (Referenced to GND)

0

V

Operating Temperature, All Package Types

– 55

+ 125

_C

Input Rise and Fall Time

(Figure 1)

0

0

0

1000

500

400

ns

ORDERING INFORMATION

Device

Package

MC74HC00AN

PDIP−14

2000 Units / Box

MC74HC00ANG

PDIP−14

(Pb−Free)

2000 Units / Box

MC74HC00AD

SOIC−14

55 Units / Rail

MC74HC00ADG

SOIC−14

(Pb−Free)

55 Units / Rail

MC74HC00ADR2

SOIC−14

2500 Units / Reel

MC74HC00ADR2G

SOIC−14

(Pb−Free)

2500 Units / Reel

MC74HC00ADT

TSSOP−14*

96 Units / Rail

MC74HC00ADTR2

TSSOP−14*

2500 Units / Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

*This package is inherently Pb−Free.

This device contains protection

circuitry to guard against damage

due to high static voltages or electric

fields. However, precautions must

be taken to avoid applications of any

voltage higher than maximum rated

voltages to this high−impedance cir-

range GND

Unused inputs must always be

tied to an appropriate logic voltage

Unused outputs must be left open.