công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SI-3006KWD bảng dữ liệu(PDF) 8 Page - Allegro MicroSystems |
|
SI-3006KWD bảng dữ liệu(HTML) 8 Page - Allegro MicroSystems |
8 / 9 page SI-3006KWD 1 A, Low-Dropout, Dual Output, 1.8 V & 3.3 V Regulator 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 Linear Regulators 8 Tape Specifications 1. Material: conductive polystyrene. 2. Allowable camber: 1 mm/100 mm maximum. 3. A0 (10.6 mm) and B0 (15.7 mm) measured on a plane 0.3 mm above the bottom of the pocket. 4. K0 (4.9 mm) is measured from a plane on the inside bottom of the pocket to the surface of the carrier. 5. Ten pitches cumulative tolerance on tape ±0.2 mm. 6. The space between parts and cavity must not exceed ±0.3 mm from its normal position in any direction. 7. Surface resistivity of embossment: 107 ohm/cm2 max. 8. K1 = 3.9 mm. Tape and Reel Dimensions in Millimeters |
Số phần tương tự - SI-3006KWD |
|
Mô tả tương tự - SI-3006KWD |
|
|
Link URL |
Chính sách bảo mật |
ALLDATASHEET.VN |
Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |