TEWS TECHNOLOGIES GmbH
Am Bahnhof 7
25469 Halstenbek / Germany
Phone: +49-(0)4101-4058-0
Fax: +49-(0)4101-4058-19
e-mail: info@tews.com
www.tews.com
TEWS TECHNOLOGIES LLC
1 E. Liberty Street, Sixth Floor
Reno, Nevada 89504 / USA
Phone: +1 (775) 686 6077
Fax: +1 (775) 686 6024
e-mail: usasales@tews.com
www.tews.com
The Embedded I/O Company
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice
06/2002
IndustryPack is a registered trademark of SBS Technologies, Inc.
Application Information
The TIP606 is an IndustryPack® compatible module and is
designed for avionic test environments. It provides 16
optically isolated differential inputs for high unipolar input
voltage which may exceed the supply voltage of the
module. The inputs can withstand input voltage up to 44V
maximum between the two differential input pins.
Due to the differential inputs of the TIP606, it is even
possible to use the module in noisy environments. The
TIP606 provides a high differential input resistance of
112kohms typically.
The interface circuit will detect a logic 1, if the differential
voltage is typically greater than +14.0V and it will detect a
logic 0, if the input voltage is typically lower than +3.5V.
The
inputs
are
isolated
from
the
IP
interface
via
optocouplers. Each input is capable of generating interrupts
on rising or falling edges of the input signal. It is also
possible to disable the generation of interrupts and poll the
input register for new data.
All inputs have an electronic debounce circuit. The
debounce time is programmable in a range from 900µs up
to 230ms in 256 steps of 900µs. The debounce circuit can
also be disabled. The TIP606 is designed for an operating
temperature from -40°C to +85°C.
For
First-Time-Buyers
the
engineering
documentation
TIP606-ED
is
recommended.
The
engineering
documentation includes TIP606-DOC, schematics and data
sheets.
The driver software TIP606-SW-xx provides functions to
configure the TIP606, read the input status and connect
software events to input state changes.
Technical Information
! Interface according to IndustryPack specification
! Identification-PROM supports auto-configuration
! Single Size IndustryPack
! 16 interrupt generating differential digital inputs
! Up to 44V signal voltage for all 16 inputs
! Optocouplers for galvanic isolation of input to computer
system
! All inputs have an electronic debounce circuit,
debounce time is freely programmable
! Operating temperature -40°C to +85°C
ID-PROM
Input
Register
with Interrupt
Capability
8 bit vector
Decoder
Electronic
Debouncing
16 Opto-
couplers
16 Input
Circuits
Order Information
TIP606-10
16 Interrupt Generating Digital Inputs
TIP606-DOC
User Documentation
TIP606-ED
Engineering Documentation, includes
TIP606-DOC
TIP606-SW-12
OS-9 Software Support
TIP606-SW-32
pSOS Software Support
TIP606-SW-42
VxWorks Software Support
TIP606-SW-62
Windows NT 4.0 Software Support
TIP606-SW-72
LynxOS Software Support
TIP606-SW-82
LiNUX Software Support
TIP606-SW-92
QNX 4 Software Support
TIP606-SW-95
QNX 6 Software Support
TIP606
16 Interrupt generating Digital Inputs